| Greg Stewart |
See Subject. Michael Percy will sell matched pairs, but doesn't sell to a certain value. I need that for RIAA caps.
Greg in Minneapolis |
|
|
| Ric Schultz |
| Don't think anything but what Percy sells are available unless you order at least 100 of a value directly from TRT (Peter Moncrief). I believe TRT has a website. Also IAR-80 is a website of his. You could email Peter. |
|
|
| Greg Stewart |
I didn't expect to get an answer from 'THE' Ric Schultz... I am honored! Inspired by your Ultimate Attenuators, I recently (last summer) converted my Q&D ladder attenuator to a switched shunt mode... thanks for popularizing this.
I also appreciate your tips and tweaks on your website. Sorry, I'm too much of a poor audiophile, builder, and tweaker to buy one of your pieces of gear right now, but your free sharing of ideas has been invaluable!
Enough of the Ric Schultz fanclub stuff, back to the original thread, Part Connexion did go through their stock of Dynamicaps to select values for a very reasonable fee... and got them to me about 5 days faster than they said. The only problem was that the .01's all came up a bit over-value and they called Peter Moncrieff and confirmed that most of this line does come out a bit over and that they wouldn't find my exact value... I'll have to play with other values to get the RIAA exactly right.
Here's a question for the capacitor mavens out there... in addition to the Dynamicaps, what other brands of caps should I consider for RIAA equalization caps in .01 and .033 values?
TIA!
Greg in Minneapolis |
|
|
|
