| woody |
I have a working dh200 that I am thinking about stripping. I will
sell the 2 circuite boards, filter caps and transformers for $30 +
shipping from 30290. Or I will let the whole amp go for $90 +
shipping. This add is only good through 7/1/08 . |
|
|
| Dick West |
Which version of circuit boards do you have? Are they built on phenolic board or fiberglass/epoxy with through plated holes. Are the little caps mylar film or ceramic?
Can you post a picture? Or, what is the serial number of your amp?
Do your circuit cards look like this one?
Would you consider selling just the circuit boards, if they are working OK?
Thanks |
|
|
| woody |
Cheaper boards like in the photo you posted. No I need to
get rid of the transformer ,caps and boards or the whole
amp. Once upon a time the amp was droped and the chassis
is warped a little so for the next 24 hours I will let the amp go
for $70 + shipping from 30290. I am posting this at 11:31 my
time so this offer expires noon 6-28-08 my time. |
|
|
| Dick West |
Good luck on selling your parts. I love Hafler amps and already have all the parts except circuit cards so not interested.
Haflers represent a very good bang for the buck. |
|
|
| Dick West |
$$ sent for the boards. More later when I receive them.
Thanks a lot. |
|
|
| woody |
Dick just bought the boards so this add is CLOSED.
Thanks for the prompt payment Dick |
|
|
| Stormrider |
| Keeping the heatsinks? I need a pair. |
|
|
| Dick West |
Woody,
Thanks for the prompt service and good packing.
I finally got the two circuit cards installed and added a little DC nulling circuit to each. Now, they are running a pair of mono blocks and the sound is GRreeat!
You are a good man :) |
|
|
|
