| mgm2000ro |
I am trying to modify an existing schematic (the PCB is already printed). This means I cannot modify too many things, except changing a few parts. I would appreciate some help in finding the best feedback configuration for this schematic.
As I said, no large modifications are possible (like replacing IC's),
Please drow on this schematic |
|
|
| Pafi |
| Thank you for the possibility for helping you! |
|
|
| mgm2000ro |
| koszonom szepen ! Peter |
|
|
| mgm2000ro |
| Hello. I'm back from vacation and ready to tackle the problems. This is how the amplifier works now |
|
|
| Pafi |
This is a nice way to describe the working of your circuit!
Your scope probe seems to have too much capacitance, you should have to change to 1:10 type, but othervise the 10k at the input of gate-driver is too high also. It's better to have much smaller impedances where you need fast changes. You could also increase the current of level-shifter.
Otherwise does it work more or less well?
I've just recognized: +/-120V ?!? |
|
|
|
