| WHEELS |
I have purchased an older kenwood kac 8070 off of ebay and the jack@^% I purchased it from left out the fact that it did not include the din cord. I have searched hi and low to find one and now I have to resort to begging for your help.... It is a 8 pin cable to rca. I have found out that the item # is E30-1477-08. Any help would be greatly appreciated!!!! Thank you for any help or advice you may have!!
Thanx!!
Michael in Woodstock, Ga
mlk327ga@aol.com
:headbash: |
|
|
| tsmith1315 |
| Michael, I may have one leftover. Send me an email if you want me to have a look around. |
|
|
| jol50 |
| I have 4 on a kenwood EQ/xover so it is all RCA, but not sure if I have any more. I can check the pinout if you need. If it is standard old DIN you can find cables cheap for old stuff. |
|
|
| I Am An Idiot |
| If you decide to build it yourself. |
|
|
| jol50 |
| I got mine from a tech I knew, he whipped them up all the time for kenwood and alpine. Why they didn't use RCA is beyond me, I still have an ancient alpine amp I love with DIN and a power light and speaker/power wires that is it. You can get the bare DIN ends, I don't know if you can get the stub RCA or just chop one. It would be easy to slap together. |
|
|
|
