| luvdunhill |
Forum Moderators: please move to an appropriate place...
I am organizing a mini-group-buy for Vishay-Roederstein MKP1837 capacitors. This are not readily available here in the US and the source I've used in the past is going through Newark which charges a fee as they then turn around and source the parts from Farnell. With the plunging dollar, this method will be cheaper than ordering direct from Farnell and having an overseas friend forward the parts my way.
Here are the available values and prices per piece:
0.010uF/160V $0.512
0.015uF/160V $0.522
0.022uF/160V $0.533
0.033uF/160V $1.290
0.047uF/160V $0.631
0.068uF/160V $0.704
0.100uF/160V $0.796
Price breaks are at 250 per value. If we get close to these numbers, I'll let everyone know and we can re-ante up then.
Here are a few references:
http://www.humblehomemadehifi.com/Cap.html
http://www.farnell.com/datasheets/75260.pdf
At the moment, I will be requiring a $25 minimum order. The $15 handling fee as well as the shipping from Newark to me will be divided among the participants. Then figure a few bucks for shipping via USPS to your house. Then there is PayPal fees.... I will most likely do a two stage payment, so to start all you'll be responsible is for your "kit" :)
I have dealt with a number of people on this forum, and I'm sure they would be willing to vouch for me. I can provide additional references outside of this forum if need be as well.
I will be keeping this group buy open for a week, as I have already collected some money and don't want to keep people waiting. If we get close to the 250 price break, I may extend the group buy to see if we can hit that target and save people some money.
Thank you and don't hesitate to contact me! |
|
|
| analog_sa |
| 10 each please. |
|
|
| luvdunhill |
| I'm planning on closing this mini-GB this weekend, so get your orders in! |
|
|
| DaveM |
I pm'd you about this a while back and didn't hear a reply and then lost the thread. I would be in for 50 of the .01mF
Did you note that these are actually a different model than Tony Gee talks about on his site? These are 160V and the ones he uses are 100V. I don't know that that will make a difference, but there it is.
Dave |
|
|
| Peter Daniel |
| I will take 40pcs of 0.100uF/160V |
|
|
| luvdunhill |
| quote: | Originally posted by DaveM
I pm'd you about this a while back and didn't hear a reply and then lost the thread. I would be in for 50 of the .01mF
Did you note that these are actually a different model than Tony Gee talks about on his site? These are 160V and the ones he uses are 100V. I don't know that that will make a difference, but there it is.
Dave |
The capacitors are rated to 160 VDC / 100 VAC. I'm sure he's quoting the 100 VAC number. |
|
|
| KP11520 |
Hi,
Please add me to the list.
I need:
20 of the 0.010uF/160V @ $0.512 = $10.24
12 of the 0.022uF/160V @ $0.533 = $6.40
12 of the 0.047uF/160V @ $0.631 = $7.57
20 of the 0.100uF/160V @ $0.796 = $15.92
64 pieces for $40.13 plus shipping, handling and PayPal.
Thank you for doing this. I was wondering how to get these in small amounts!
Regards//Keith |
|
|
| luvdunhill |
payments confirmed for:
analog_sa
DaveM
Peter Daniel
Barry
on the 0.1uF and 0.01uF values, which are the most popular, we'll need to hit 188 then I can order 250 for the same price :D I will distribute the "free" devices in proportion to everyone's order, assuming the total ordered is less than 250. If we're at 250+ then I can apply the difference towards your shipping.
At the moment, we're at:
(150) 0.01uF
(90) 0.1uF |
|
|
| KP11520 |
OK,
I will add 4 more of each 0.1 and 0.01. I know it isn't much but hopefully it will help!
I NOW need:
24 of the 0.010uF/160V @ $0.512 = $12.29
12 of the 0.022uF/160V @ $0.533 = $6.40
12 of the 0.047uF/160V @ $0.631 = $7.57
24 of the 0.100uF/160V @ $0.796 = $19.10
72 pieces for $45.36 plus shipping, handling and PayPal.
Payment using the PayPal formula will be sent in a few minutes!
Thanks!
Regards//Keith |
|
|
| rolandong |
Hi luvdunhill,
Pls save me:
44 of the 0.100uF/160V @ $0.796 = $35.024
10 of the 0.010uF/160V @ $0.512 = $5.12
54 pieces for $40.144 plus shipping, handling and PayPal.
How much is shipping and handling to Waycross GA so I can pay via paypal ?
Thanks!
Regards,
Roland |
|
|
| Cobra2 |
40 of the 0.100uF/160V for me, please.
Arne K |
|
|
| jacco vermeulen |
100 of the 0.100uF/160V, please.
(aint $-plunging grand) |
|
|
| secanbj |
I would like to have 50 of the 0.01uF/160
Thanks for doing this!
/Anders |
|
|
| cwujek |
Hello, I would like the following please:
0.010uF/160V $0.512 X10
0.015uF/160V $0.522 X10
0.022uF/160V $0.533 X10
0.047uF/160V $0.631 X10
0.068uF/160V $0.704 X10
0.100uF/160V $0.796 X20
Thanks,
Chris |
|
|
| ZUM911 |
Hi,
I'd like:
20 of the 0.100uf
10 of the 0.047uf
10 of the 0.022uf
20 of the 0.010uf
$37.80 less shiping and paypal
thanks
rick |
|
|
| korben69 |
Hi !
Many thanks for this GB, I'd like :
20 x 0.100uf
10 x 0.047uf
20 x 0.010uf
$32.47 less shiping and paypal. |
|
|
| luvdunhill |
| quote: | Originally posted by korben69
Hi !
Many thanks for this GB, I'd like :
20 x 0.100uf
10 x 0.047uf
20 x 0.010uf
$32.47 less shiping and paypal. |
korben69:
you have your e-mail turned off. Please contact me with your e-mail address. |
|
|
| korben69 |
| Sorry, it's on now ! ;) |
|
|
| JC Fardo |
Hello
Please, my list is:
20 of the 0.100uf
10 of the 0.047uf
10 of the 0.022uf
20 of the 0.010uf
$37.80 less shiping outside USA and paypal.
Thanks a lot for start GB and regards
JC jcDOTrf55ATgmailDOTcom |
|
|
| marsel |
Hi!
I'd like:
30pcs. 0,01uf
Many thx. |
|
|
| luvdunhill |
I've replied to everyone at this point. Please remit payment so we can get things started. If you have not gotten a total amount from me, please contact me and I will resend it.
Thanks! |
|
|
| joemana |
Hi,
Can I have:
40pcs of 0.010uF/160V $20.48
12pcs of 0.100uF/160V $9.552
Thanks,
Joe |
|
|
| bakus11 |
20x .047uF @ .631= 12.62
20x .100uF @ .796= 15.92
10x .033uF @ 1.29= 12.90
10x .010uF @ .512= 5.12
46.56
-alan |
|
|
| KP11520 |
jacco,
Ouch! Do you havt to rub it in? LOL
Regards//Keith |
|
|
| luvdunhill |
| quote: | Originally posted by joemana
Hi,
Can I have:
40pcs of 0.010uF/160V $20.48
12pcs of 0.100uF/160V $9.552
Thanks,
Joe |
Joe:
your e-mail option is turned off. Please contact me for details. |
|
|
| KP11520 |
Well Marc,
Looks like this idea is a hit! Talk about Community Service!
Thanks!
Regards//Keith |
|
|
| luvdunhill |
| quote: | Originally posted by KP11520
Well Marc,
Looks like this idea is a hit! Talk about Community Service!
Thanks!
Regards//Keith |
yup, I'm surprised I got as many over-seas buyers as I did... :) now if I can just get everyone to pay up!
I'm going to try and close this group buy on:
Monday, December 17th at 8:00 AM CST (GMT-6)
consider yourself warned :) |
|
|
| joemana |
| quote: | Originally posted by luvdunhill
Joe:
your e-mail option is turned off. Please contact me for details. |
Luvdunhill,
I can't activate my email thru diy, but here is my email adddress:
joemana90@netzero.net
Thanks,
Joe |
|
|
| Maousse |
Hi, I'm in for : (x50) 0.100uF/160V
Thanks
Trung |
|
|
| joemana |
Luvdunhill,
If I understand it correctly, the part will be purchased outside US correct?
I just want to warn you if in case you are not aware of the US custom policy on the amount of incoming items from abroad.
I had an experienced when I ordered Amp kit from 41Hz worth around US$400. and it took several months to get the units.
The custom representative was initially asking for my phone number and later the copy of my income tax.
I told them forget it, I will not provide anything to them and told them to return the package to 41Hz and they did after several months.
Joe |
|
|
| luvdunhill |
| quote: | Originally posted by joemana
Luvdunhill,
If I understand it correctly, the part will be purchased outside US correct?
I just want to warn you if in case you are not aware of the US custom policy on the amount of incoming items from abroad.
I had an experienced when I ordered Amp kit from 41Hz worth around US$400. and it took several months to get the units.
The custom representative was initially asking for my phone number and later the copy of my income tax.
I told them forget it, I will not provide anything to them and told them to return the package to 41Hz and they did after several months.
Joe |
Joe:
I will be getting these parts through the US-based company Newark who will order them from Farnell due to their partnership. I have done this many times in the past and have had no additional fees other than the $15.00 per order surcharge. Thanks for the concern though! |
|
|
| jacco vermeulen |
Marc,
if i order 1000 of the 0.100uF Roederstein MKP1837 from Farnell overhere they still charge $1.55 each.
Silly me, but if you indirectly order them from Farnell as well, why are you charged half that rate ?
Not a currency conversion mix-up thingy ? |
|
|
| luvdunhill |
jacco:
you're a sharp guy :) I will look into it and check my old receipts. |
|
|
| jacco vermeulen |
| Or i'm dumb but know what MKP1837s cost and sound like longer than Mr Ma-Gee knows how they taste. |
|
|
| Peter Daniel |
Price will also depend on tolerance.
What is quoted in first post for 0.01uF is about right and that's what I was paying when they were in stock, but Mouser price for 0.1uF at 1000pcs is $1.20/pc (1%) |
|
|
| Garytr |
Please add me to the list,
.01uf /160v :50 pcs x .512 =$25.60
Gary |
|
|
| jacco vermeulen |
The only cheaper source for the 0.1uF/160V overhere is RS, wholesaler to companies, at $1.09/pc
(1000, including 19% sales tax) |
|
|
| rolandong |
jacco,
does vishay MKP1837 sounds better than epco mkp ? |
|
|
| jacco vermeulen |
epco mkp ?
The Roederstein MKP1837 equals an EMZ B33531.
The B33531 number is Siemens, EMZ bought the production gear for this cap series, the Siemens cap division is Epcos nowadays.
Much better than the 10nF mkp1837 is a KS series, but only to 63V and i'm just about the only one who has them in biggy numbers.
A word from the Pass Sponsor :
| quote: | | I regard this as a religious argument thing. I think religions are good and useful, and arguments between religious beliefs are interesting, and like the Jerry Springer show, even entertaining, but the fact is that solid information is hard to come by. |
|
|
|
| dweekie |
I'll take
24 of the 0.010uF x $0.512 = $12.29
24 of the 0.100uF x $0.796 = $19.10
Total: $31.39 |
|
|
| kuroda99 |
Hello,
I would also like to order some MKP 1837 caps
of the following values:
(20) 0.01 uf
(20) 0.10 uf
thanks.
kuroda99 |
|
|
| klm1 |
for:
10 ea. 0.010 uf/160V
10 ea 0.100 uf/160V
total$13.08
Thanx! |
|
|
| Reima |
I will take 24 of the 0.10uF
RC |
|
|
| Tony |
| i would like 100pcs of 0.1ufd/160volts caps please......:D |
|
|
| Ed LaFontaine |
I'll take
36 of the 0.010uF x $0.512 = $18.44
24 of the 0.100uF x $0.796 = $19.10
Total: $37.54
Thanks Marc! |
|
|
| Maousse |
| It's not a "mini" BG anymore! :clown: |
|
|
| stroob |
Thanks for doing this. I would like to sign up for
30 of the 0.010uF/160V $0.512
30 of the 0.100uF/160V $0.79
Thanks
Stroob |
|
|
| RKH |
I'm in for
30 of the 0.100uF/160V $0.79
Cheers,
Ryan |
|
|
| Algar_emi |
30 0.1uF X 160V Please.
SB |
|
|
| rolandong |
Hi Marc,
I increased my orders a bit:
72 of the 0.100uF/160V @ $0.796 = $57.312
16 of the 0.010uF/160V @ $0.512 = $8.192
65.504 * 1.03 = USD 67.47
Payments just been sent.
Thanks and congrats for the hit GB !
regards,
Roland |
|
|
| Reima |
I have adjusted my quantity to 32 of the 0.100uF/160V.
32 x 0.796 = $25.47
Where do I send the payment?
RC |
|
|
| ichiban |
Hi,
Please add me to the list.
I need:
12 of the 0.010uF/160V @ $0.512 = $ 6.15
24 of the 0.100uF/160V @ $0.796 = $19.11
36 pieces for $25.26 plus shipping, handling and PayPal.
Thank you.
Regards//JM |
|
|
| ipolyakov |
I would like to order some MKP 1837 caps
of the following values:
0.010uF/160V $0.512 x10
0.047uF/160V $0.631 x4
0.068uF/160V $0.704 X4
0.100uF/160V $0.796 x50
Thank you!
Igor |
|
|
| luvdunhill |
Crazy ... yup, not very "mini" now. :xeye: I'm going to need some time to get things together, so I'm extending the group buy until Wednesday.
The following users have paid up and are confirmed:
DaveM
KP11520
Peter Daniel
analog_sa
barry
marsel
bakus11
ZUM911
secanbj
Maousse
jomana
korben69
dweekie
JC Fardo
rolandong
jacco
Cobra2
luvdunhill
The following users have been contacted with payment details, but have not paid:
cwujek
kuroda99
klm1
garrytr
landoctor
reima
RKH
tony
ichiban
ipolyakov
stroob
algar_emi
Ed Fontaine
We have (384) 0.01uF paid for and (472) 0.10uF paid for. I have reserved 500 of each from Newark as of last Friday.
Total numbers committed for thusfar are (532) 0.01uF and (862) 0.10uF. I will call and look into further discounts for you guys tomorrow, so stay tuned.
I didn't expect things to take off this much, so I'll have to see where we are.
-Marc |
|
|
| JoeyDD |
Hi Marc,
I have already sent you an email for:
40 x 0.010uF
30 x 0.100uF
Thanks.
Paul |
|
|
| jerishi |
| If there's time- I'd like 20 pieces .01 at .512 = $10.24. 12 pieces.022 at .533 = $6.40 And 20 pieces .100 at .796= 15.92. If my math is correct, it comes to $32.56 before paypal and your expenses. Please let me know total, can send paypal or direct. Thanks for arranging this- appreciate this forum and all involved. |
|
|
| Maousse |
| luvdunhill : may be you should put an end at a "round" number, like 500 lots or 1000 lots? |
|
|
| luvdunhill |
I'm dreading the e-mail traffic from this response, but you'll be glad to know that the first 500 0.1uF and 500 0.01uF have been shipped (I just talked with Newark)! Looks like we're a go, despite the nay-sayer Jacco. At this point, the final price is:
$0.370 for the 0.01uF
$0.576 for the 0.10uF
This doesn't including the shipping cost to me and Farnell fee, but that will be rather trivial with so many participants. Once I have a final invoice, I'll disclose these costs :) The final cost may change slightly, but the above is a good estimate that unfortunately (for me) may err on the low side. Again, all will be made right when the final shipping amounts go out.
Now, if you have already ordered either one of these denominations, you have two options. The first, apply the credit to you final shipping (preferred and default if I don't hear from you) or have me adjust your quantities and ... GET MORE CAPS! :D
You must respond to me and state a preference before Wednesday, December 19th at 8:00AM CST, because that's when I'll be placing the remaining order as well as the other sizes. Thus the group buy will be CLOSED then.
Thanks everyone! |
|
|
| jacco vermeulen |
| Oh yea great warrior of the part lands |
|
|
| jacco vermeulen |
Just as a quickie reference : the 1990 rate for buying a single of the 0.1uF/100Vdc predecessor of the KP1837 at Burklin-Germany was $0.572 at the current exchange rate
=> 0.4 $-cent difference (17 years later and 160V parts, <+3$c at the early '90 exchange rate )
Chapeau for the Dunhill smoker. |
|
|
| luvdunhill |
analog_sa, cwujek:
The 0.015uF is out of stock, so I'll have to cancel your order for those (and any other interested parties). |
|
|
| KP11520 |
Hi Marc,
If possible, I would prefer the extra caps. Who couldn't use more caps!
It's like more pudding at the orphanage! Nobody gets more PUDDING!
Thanks!
Regards//Keith |
|
|
| bakus11 |
More caps!
:)
-alan |
|
|
| luvdunhill |
yeah for the "more caps"! :D
I'd sit down and divide two numbers and stick the word "floor" in front of the fraction to round down and tell you how many caps extra you'll get, but my brain is so tired right now ...
:dead: |
|
|
| Ed LaFontaine |
| Mongo would like to know if he can assume the price for intermediate values remains unchanged from the beginning of the thread. |
|
|
| luvdunhill |
| quote: | Originally posted by Ed LaFontaine
Mongo would like to know if he can assume the price for intermediate values remains unchanged from the beginning of the thread. |
yup... we are nowhere near enough for the other denominations.
If you haven't paid yet, you can use the new value (I guess the "last will be first" in this instance). Just multiply by 1.03 (or add 3%) to get your total and send me this amount and I'll let you know what you owe when shipping time comes. |
|
|
| ichiban |
| quote: | Originally posted by ichiban
Hi,
Please add me to the list.
I need:
12 of the 0.010uF/160V @ $0.512 = $ 6.15
24 of the 0.100uF/160V @ $0.796 = $19.11
36 pieces for $25.26 plus shipping, handling and PayPal.
Thank you.
Regards//JM |
Please apply the overpayment to shipping costs etc., Thanks. :D |
|
|
| luvdunhill |
| quote: | Originally posted by jacco vermeulen
Just as a quickie reference : the 1990 rate for buying a single of the 0.1uF/100Vdc predecessor of the KP1837 at Burklin-Germany was $0.572 at the current exchange rate
=> 0.4 $-cent difference (17 years later and 160V parts, <+3$c at the early '90 exchange rate )
Chapeau for the Dunhill smoker. |
never look a gift horse in the mouth:
 |
|
|
| joemana |
Hi Marc,
Can you please adjust the quantities of the .01uF on my order.
Thanks,
Joe |
|
|
| Pars |
Hi Marc,
I'd like to order
40 of the 0.100uF/160V @ $0.576 = $23.04
Thanks,
Chris |
|
|
| Ed LaFontaine |
Original order:
36) 0.01
24) 0.1
Order increased to add
12) 0.022 and
12) 0.047
Notes / summary included with transaction
Thanks |
|
|
| luvdunhill |
| quote: | Originally posted by ichiban
Please apply the overpayment to shipping costs etc., Thanks. :D |
dude, you have to pay before you can elect this :D contact me if you think you have paid already...
I have the following non-payers at this moment in time:
cwujek
klm1
landoctor
tony
ichiban
ipolyakov
mhashpong
pars
jerishi
JoeyDD |
|
|
| luvdunhill |
| quote: | Originally posted by Algar_emi
30 0.1uF X 160V Please.
SB |
I feel your pain now in a "mini" sort of way :) |
|
|
| Maousse |
| quote: | Originally posted by luvdunhill
Now, if you have already ordered either one of these denominations, you have two options. The first, apply the credit to you final shipping (preferred and default if I don't hear from you) or have me adjust your quantities and ... GET MORE CAPS! :D
Thanks everyone! |
Get more caps for me! :D |
|
|
| luvdunhill |
I will be adding 25% more caps to the people who vote for more caps. The actual difference is 1 - (0.370 / 0.512) = 27.7% for the 0.01uF and similarly 1 - (0.576 / 0.796) = 27.6% for the 0.10uF. I'll truncate the decimal part and apply the change to your shipping.
For example, if you ordered (20) 0.10uF and (20) 0.01uF, Santa will be sending you 25 of each :cool:
Also, the first batch of 500 0.1uF and 500 0.01uF has shipped and I have a confirmed PO number from Newark. :smash: |
|
|
| luvdunhill |
I started looking into the International postal rates...
I can send up to 4 pounds via Priority Mail International for $9.00 Canada / Mexico and $11.00 all other countries. Honestly, this would be easiest for me as the post office provides all the mailing supplies, etc. and it will be quickest to get to you.
The only other feasible option is First-Class (rate charts by country are here):
http://pe.usps.com/text/Imm/immctry.htm
When the time comes, I'll ask you to choose one or the other. I have no idea for example how much 100 capacitors will weigh, but in Jacco's case (Netherlands), it would have to be less than 16 ounces for first-class to be more cost effective than the Priority Mail International option.
Take care! |
|
|
| ZUM911 |
I'll take more caps thanks
Rick |
|
|
| Barry1 |
Marc: Crazy huh?!
I just sent you another $6.31 for
10 qty of .047 uf
Thanks Barry |
|
|
| rolandong |
Hi Marc,
more caps for me pls.
thanks,
Roland |
|
|
| jacco vermeulen |
| quote: | Originally posted by luvdunhill
how much 100 capacitors will weigh |
I've put some on a digital kitchen scale ;
0.01uF : < 2 Ounces
0.1uF : < 5 Ounces
(At those prices i'd even stick my head in the other end of the Trojan critter) |
|
|
| JC Fardo |
| quote: | Originally posted by luvdunhill
I started looking into the International postal rates...
I can send up to 4 pounds via Priority Mail International for $9.00 Canada / Mexico and $11.00 all other countries. Honestly, this would be easiest for me as the post office provides all the mailing supplies, etc. and it will be quickest to get to you.
The only other feasible option is First-Class (rate charts by country are here):
http://pe.usps.com/text/Imm/immctry.htm
When the time comes, I'll ask you to choose one or the other. I have no idea for example how much 100 capacitors will weigh, but in Jacco's case (Netherlands), it would have to be less than 16 ounces for first-class to be more cost effective than the Priority Mail International option.
Take care! |
Hi Marc
This serves me well. I´ve ordered heavier components from Digikey, Michael Percy, etc by regular USPS airmail. No problemo. If Priority Mail is your best option, fine to me.
Regards,
JC |
|
|
| Derrick |
If it's not too late to get in, please put me down for
(20) 0.010uF/160V
(20) 0.100uF/160V
Thanks |
|
|
| Maousse |
| quote: | Originally posted by luvdunhill
When the time comes, I'll ask you to choose one or the other. I have no idea for example how much 100 capacitors will weigh, but in Jacco's case (Netherlands), it would have to be less than 16 ounces for first-class to be more cost effective than the Priority Mail International option.
Take care! |
luvdunhill : I would prefer First class mail, Priority means leave work early and go to the post office... French post... argh!... :P |
|
|
| luvdunhill |
at this moment the following have paid:
DaveM
KP11520
Peter Daniel
analog_sa
barry
marsel
bakus11
ZUM911
secanbj
Maousse
jomana
korben69
dweekie
JC Fardo
rolandong
kuroda99
jacco
algar_emi
reima
RKH
garrytr
Ed LaFontaine
stroob
ipolyakov
derrick
mhashpong
JoeyDD
Cobra2
luvdunhill
The following have not paid
cwujek :smash:
klm1 :smash:
landoctor :smash:
tony :smash:
ichiban :smash:
pars :smash:
jerishi :smash:
The following want "more caps!":
KP11520 :cool:
bakus11 :cool:
Maousse :cool:
jomana :cool:
RKH :cool:
JoeyDD :cool:
... and everyone else wants the extra to cover shipping
I'm going to close the group buy tomorrow morning, so pay up! I'll order a few extra caps, but those will be sold at my discretion (i.e. for extra :$: ) If you want more caps, let me know... we need to sell a few more 0.01uF caps so everything will even out... |
|
|
| DaveM |
I'll take extra caps.
Thanks. |
|
|
| xaudiox |
Hi,
I'd like to order
70pcs 0.1uF @ $0.576
10pcs 0.01uF @ $0.370
tnx |
|
|
| Peter Daniel |
I'm not sure if you've seen my e-mail but I'd like to change my order to:
200 x 0.01uF
200 x 0.1uF
Thanks |
|
|
| xtaltech |
| You did a good job! |
|
|
| stroob |
more is best for me.
Thanks |
|
|
| Garytr |
I will take more caps also, please.:cool:
Garytr |
|
|
| rolandong |
Hi Marc,
pls post #80
thanks |
|
|
| ZUM911 |
Hi Marc,
Jus to confrim that was more caps for me, too
thanks
Rick |
|
|
| BenY |
If it`s not too late,
I need
0.010uF/160V 20 pcs
0.015uF/160V 10 pcs
0.022uF/160V 10 pcs
0.033uF/160V 20 pcs
0.047uF/160V 10 pcs
0.068uF/160V 10 pcs
0.100uF/160V 50 pcs
How do i pay for??
Shipped to Israel.
Thank you ,
Yuval. |
|
|
| danny_66 |
If it's still not too late,
I would like to buy
0.010uF/160V 100 pcs
0.100uF/160V 100 pcs
Thanks,
Danny. |
|
|
| luvdunhill |
danny_66:
your e-mail is not turn on. Please contact me asap as I'm trying to close the GB. |
|
|
| luvdunhill |
Group Buy is now CLOSED.
Thanks everyone for participating! Once I receive the first batch of capacitors, I will start invoicing you for shipping if need be.
I purchased some extra 0.01uF and 0.10uF capacitors and would be willing to sell them at a markup from the original group buy. Please contact me for details.
If you have not sent me money at this point, your order has been canceled. I'm so sorry, but I had to draw the line somewhere. I will post final ordered quantities sometime today and please double-check things for me and we can shuffle the numbers around if we need to.
Group Buy is now CLOSED. |
|
|
| KP11520 |
:c_flag: :c_flag: :c_flag: :c_flag:
Thank you Marc!:cheers:
Regards//Keith |
|
|
| luvdunhill |
okay, here are the final numbers
| code: | name | 0.01uF | 0.022uF | 0.033uF | 0.047uF | 0.068uF | 0.10uF |
DaveM | 050 | 000 | 000 | 000 | 000 | 000 |
KP11520 | 030 | 012 | 000 | 012 | 000 | 030 |
Peter Daniel | 200 | 000 | 000 | 000 | 000 | 200 |
analog_sa | 010 | 010 | 010 | 010 | 010 | 010 |
barry | 062 | 000 | 000 | 000 | 000 | 000 |
marsel | 030 | 000 | 000 | 000 | 000 | 000 |
bakus11 | 012 | 000 | 010 | 020 | 000 | 025 |
ZUM911 | 025 | 010 | 000 | 010 | 000 | 025 |
secanbj | 050 | 000 | 000 | 000 | 000 | 000 |
Maousse | 000 | 000 | 000 | 000 | 000 | 062 |
jomana | 050 | 000 | 000 | 000 | 000 | 015 |
korben69 | 020 | 000 | 000 | 010 | 000 | 020 |
dweekie | 024 | 000 | 000 | 000 | 000 | 024 |
JC Fardo | 020 | 010 | 000 | 010 | 000 | 020 |
rolandong | 020 | 000 | 000 | 000 | 000 | 090 |
kuroda99 | 040 | 000 | 000 | 000 | 000 | 020 |
Jacco | 000 | 000 | 000 | 000 | 000 | 100 |
algar_emi | 000 | 000 | 000 | 000 | 000 | 030 |
reima | 000 | 000 | 000 | 000 | 000 | 032 |
RKH | 000 | 000 | 000 | 000 | 000 | 037 |
garrytr | 025 | 000 | 000 | 000 | 000 | 025 |
LaFontaine | 036 | 012 | 000 | 012 | 000 | 024 |
stroob | 037 | 000 | 000 | 000 | 000 | 037 |
ipolyakov | 010 | 000 | 000 | 004 | 004 | 050 |
derrick | 020 | 000 | 000 | 000 | 000 | 020 |
xaudiox | 010 | 000 | 000 | 000 | 000 | 070 |
SheldonD | 040 | 000 | 000 | 000 | 000 | 100 |
mhashpong | 020 | 000 | 000 | 000 | 000 | 020 |
garrytr | 025 | 000 | 000 | 000 | 000 | 025 |
pars | 000 | 000 | 000 | 000 | 000 | 040 |
JoeyDD | 050 | 000 | 000 | 000 | 000 | 037 |
Cobra2 | 000 | 000 | 000 | 000 | 000 | 040 |
luvdunhill | 000 | 000 | 000 | 000 | 000 | 000 |
|
If I have messed anything up (and I probably have) I'll try my best to rectify things. However, you have 24 hours to speak your grievances, then the above numbers are set in stone.
-Marc |
|
|
| Ed LaFontaine |
| Brave man!:smash: |
|
|
|
