Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Market Place > Trading Post
 
FS: Blueprint 1503 15" subwoofer and Nady Audio XA-1100 power amp - Click HERE for Original Thread
needtubes
I have upgraded subs to a JL Fathom F112 and need to recoup some of my loss by selling off my old sub and amplifier...

The Blueprint 1503 is about three years old, I think. I bought it new from Acoustic Visions and used it in my home theater with the Nady XA-1100 power amp. It worked very well and sounded great, but I decided I needed a smaller sub (hence the JL purchase). This sub was never abused or pushed to its limits. It comes with its original gasket (shown on woofer in picture) and will be packed in its original packing materials (wooden frame with particle board on both ends, foam for protection, inside the original cardboard box). This is still an excellent sub when compared with its modern counterparts, as it had about 27mm of linear excursion (if memory serves me right) and has a massive motor structure with triple stacked magnets. I will post the T/S specs if when I get a chance to dig around for them... Originally paid about $275 shipped... Asking $215 + shipping

The Nady Audio XA-1100 is a very good power amp for the money... I bought it from a local musical instruments shop and it has served me well. It will do 1100 watts into four ohms when bridged. Musician's Friend has a good page about it that lists all of its specs. The amp comes with its original power cord and a copy of the manual (not original manual). The amp has some light scratches here and there and maybe a couple of paint chips from moving it around. I do not have the original box, so I will have to find a box to ship it in. This amp is heavy at around 42 pounds, so shipping may not exactly be cheap, but shouldn't break the bank either... Asking $350 + shipping


Note, that I don't have a PayPal account and would prefer money order, cashier's check, or personal check (as a last resort). This should probably be limited to CONUS buyers as both items are very heavy, but I will ship to Canada and possibly other places if the buyer is willing to incur the additional shipping charges and fees. Please email me with any questions. Thank you!
needtubes
Picture of the Nady....
needtubes
Found the Blueprint T/S Specs...

Original Published Specs:
Qts 0.3
Qes 0.32
Qms 7.9
Vas 132 liters
Fs 26.8 Hz
Re 3.6 ohms
Sd 804 cm^2
Xmax 25.9 mm
BL 22.1
SPL 91 dB
Pe 1000 Watts

Now, at one point, a DUMAX report for the 1503 surfaced and had these specs:
Qts 0.376
Qes 0.411
Qms 4.458
Vas 92 liters
Fs 25.52 Hz
Re 3.93
Sd 737 cm^2
Xmax 25.9 mm
BL 22.35
SPL 87.74 dB
Pe 1000 Watts
needtubes
Back to the top...
needtubes
Ok... Price drop:

$195 + shipping for Blueprint 1503

$315 + shipping for Nady


-OR-

$500 + shipping for both
needtubes
Both still available...
needtubes
Ok...

How about $175 + shipping for the Blueprint and $295 + shipping for the Nady?
needtubes
Ok... How about some reasonable offers?
owdi
How about a bump :-) I have the Blueprint 1001 and would love to upgrade to the 1503, except my neighbors already complain about the bass from my little sub.

With EQ this could make a great OB sub.

Dan

Page generated in 0.032574892044067 seconds with 17 queries,
spending 0.00901937 doing MySQL queries and 0.02355552 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2009 diyAudio.com

Please support our sponsor.