| matsj |
Today i have a DIY 5 channel Hypex ucd 180 amp to my stereo and Ht and i think its really good, but i think i can get a better sounding amp.
I´m asking you guys for a better sounding aleph amp but i don´t know what i shall build. I have a 1.5" Jbl driver on a horn playing from 800hz to 20khz. It have around 112db/1w.
So what can you recomend me to build for a 5 channel aleph amp ?
mats |
|
|
| Nelson Pass |
A low powered Aleph, like the 3 would do fine. Alternatively,
I would recommend ZV9.
:cool: |
|
|
| Duck-Twacy |
112 db/w!
Just wondering. Won't there be some hiss? |
|
|
| Nelson Pass |
ZV9 would have the lowest hiss, simply because it has
12.5 dB gain, and the Alephs had 20 or 26. It also has
lower hum and turn-on/turn-off.
:cool: |
|
|
| matsj |
Thank you for the input. Is it possible to put a gain control on a zv9 ? Or another aleph ?
One of my problem today is to much power from my ucd 180. I have to turn the signal down in my Dbx Driverack pa crossover, but i rather want to turn the signal up and the amp down.
mats |
|
|
| hum4god |
i have the same situation 112db compression driver from 300hz up.
what would be the difference between the f3 and the zv 9 ?
what sonical difference can parts choice make for the zv 9 ?
if there is another thread i can read more about that i would be happy to .
i just started looking at the f3/zen v9 .
any help is appreciated |
|
|
|
