ILP (Plitron's former company), type 7A018.
Single primaries rated for 117VAC at 60Hz outlets.
Dual secondaries 35VAC each (measured as 37.7VAC in my socket).
Only have 1 of these to sell, asking $35 + shipping from NY.
Single primaries rated for 117VAC at 60Hz outlets.
Dual secondaries 35VAC each (measured as 37.7VAC in my socket).
Only have 1 of these to sell, asking $35 + shipping from NY.
Having another go at this:
ILP transformer listed above, price lowered to $30 + actual shipping costs from NY, 14850.
Also, would there be interest in the purchase of the following partly complete "kit" gathered for a Gainklone based mostly off Peter Daniel's circuit? I just finished my AKSA 100W amp and purchased new speakers, then discovered how low my bank account has become (not to mention I still have to finish my Pass Balanced Line Stage preamp). Parts I have have to include are (all are new and unused):
400VA 24-0-24 transformer from Victoria Magnetics
2 4.7uF Black Gate N capacitors
4 1000uF Panasonic FC capacitors
2 220k Vishay/Dale resistors
2 10k Vishay/Dale resistors
2 LM3875T
8 diodes (a couple of different types)
2 heatsinks from MECI (are much cleaner than shown)http://www.meci.com/default.asp?featured=true&partno=310-0281&mode=Search)
1 pair of Vampire M1F RCA jacks
1 set of Vampire BP2 binding posts (for 2 channels)
I'd only charge actual cost + actual shipping. Since these were gathered through many different places, someone can save a lot on shipping if these are the parts they want.
ILP transformer listed above, price lowered to $30 + actual shipping costs from NY, 14850.
Also, would there be interest in the purchase of the following partly complete "kit" gathered for a Gainklone based mostly off Peter Daniel's circuit? I just finished my AKSA 100W amp and purchased new speakers, then discovered how low my bank account has become (not to mention I still have to finish my Pass Balanced Line Stage preamp). Parts I have have to include are (all are new and unused):
400VA 24-0-24 transformer from Victoria Magnetics
2 4.7uF Black Gate N capacitors
4 1000uF Panasonic FC capacitors
2 220k Vishay/Dale resistors
2 10k Vishay/Dale resistors
2 LM3875T
8 diodes (a couple of different types)
2 heatsinks from MECI (are much cleaner than shown)http://www.meci.com/default.asp?featured=true&partno=310-0281&mode=Search)
1 pair of Vampire M1F RCA jacks
1 set of Vampire BP2 binding posts (for 2 channels)
I'd only charge actual cost + actual shipping. Since these were gathered through many different places, someone can save a lot on shipping if these are the parts they want.
- Status
- Not open for further replies.