I have a BrianGT LM3886 amp / pwr supply( fully assembled ), DIYbiz remote controlled input selector and volume, and the chassis that need a home.
It was being made as a gift for a friend but life changes cancelled this project also.
I also have the Rev_C / Kook in chassis, the Krell KSA-50 clone in chassis w/ pwr supply, and the Pass Mini-A / A30 in chassis with pwr supply. Krell is still unsoldered / kit form, A30 is assembled but not wired.
It was being made as a gift for a friend but life changes cancelled this project also.
I also have the Rev_C / Kook in chassis, the Krell KSA-50 clone in chassis w/ pwr supply, and the Pass Mini-A / A30 in chassis with pwr supply. Krell is still unsoldered / kit form, A30 is assembled but not wired.
Attachments
Re: Moved to TP
My applogies, I was thinking this forum was for "Commecial" sales, but that is the Market place forum... Sorry.
And if that is the case, I have another for a Rev_C and Kook in the wrong forum, may I ask you to please move it also?
Again, sorry, I don't like making trouble. I have enough of that to last a lifetime.
Vikash said:
My applogies, I was thinking this forum was for "Commecial" sales, but that is the Market place forum... Sorry.
And if that is the case, I have another for a Rev_C and Kook in the wrong forum, may I ask you to please move it also?
Again, sorry, I don't like making trouble. I have enough of that to last a lifetime.
Prices:
Rev_C / Kook integrated is $100
BrianGT 3886 / DIYclub remote pre is $75
BrianGT 3875 / DIYclub remote pre is $50
Krell KSA-50 clone with ALL PARTS only needing assembly is $250
Pass Labs Mini-A / A30 ALL PARTS, PCB's assembled, general assembly needed is $250
All kits have toroidial transformers with appropriate pwr supplies,
chassis, switches and fuses.
Rev_C / Kook integrated is $100
BrianGT 3886 / DIYclub remote pre is $75
BrianGT 3875 / DIYclub remote pre is $50
Krell KSA-50 clone with ALL PARTS only needing assembly is $250
Pass Labs Mini-A / A30 ALL PARTS, PCB's assembled, general assembly needed is $250
All kits have toroidial transformers with appropriate pwr supplies,
chassis, switches and fuses.
" ... Where did you get that nice PowerAmp chassi? (I want one..) ..."
Me too, if you are talking about the chassis in the very first post ( http://www.diyaudio.com/forums/showthread.php?postid=1155224#post1155224 )
I might be persuaded to buy the whole thing just to get that case & the torrid looks very usable too = got a spec = VA = ??.
<< email me >>
Me too, if you are talking about the chassis in the very first post ( http://www.diyaudio.com/forums/showthread.php?postid=1155224#post1155224 )
I might be persuaded to buy the whole thing just to get that case & the torrid looks very usable too = got a spec = VA = ??.
<< email me >>
FastEddy said:" ... Where did you get that nice PowerAmp chassi? (I want one..) ..."
Me too, if you are talking about the chassis in the very first post ( http://www.diyaudio.com/forums/showthread.php?postid=1155224#post1155224 )
I might be persuaded to buy the whole thing just to get that case.
<< email me >>
Dude-
The first case is "par-metal" series 20. VERY reasonably priced and SUPER functional. They can puch the holes for you.. I ALWAYS have them punch the IEC pwr input socket hole so I don't have to deal with it..
http://www.par-metal.com/
http://www.par-metal.com/20series.htm
BENCH TOP CASES (un-finish) U Please add $25 for punch vent holes or standard rounds and rectangles
MODEL 1 to 5 6 to 19 20 to 49 50 up
20-12082N 34.00 30.60 27.50 24.80 12W x 8D x 2H
20-12122N 37.00 33.30 30.00 27.00 12W x 12D x 2H
20-12083N 38.00 34.20 30.80 27.70 12W x 8D x 3H
20-12123N 41.00 36.90 33.20 29.90 12W x 12D x 3H
20-16123N 46.50 41.90 37.70 33.90 16W x 12D x 3H
20-12124N 45.50 41.00 36.90 33.20 12W x 12D x 4H
20-16124N 50.50 45.50 41.00 36.90 16W x 12D x 4H
20-16164N 54.00 48.60 43.70 39.30 16W x 16D x 4H
20-12125N 49.50 44.60 40.10 36.10 12W x 12D x 5H
20-16125N 55.00 49.50 44.60 40.10 16W x 12D x 5H
20-16165N 58.00 52.20 47.00 42.30 16W x 16D x 5H
20-16126N 59.00 53.10 47.80 43.00 16W x 12D x 6H
20-16166N 62.00 55.80 50.20 45.20 16W x 16D x 6H
20-16128N 63.00 56.70 51.00 45.90 16W x 12D x 8H
20-16168N 66.50 59.90 53.90 48.50 16W x 16D x 8H
The chassis I think Arne K was referring to (correct me if I'm wrong) is the class-A chassis with the serious heat sinks. That was a surplus deal from an amp company gone bust.
I have one gentleman intrested in three amps, and another gentleman intrested in one. I hope ya'll are gentleman... 
Anyway, the Rev_C (man I loved this one), the BrianGT LM3886, and Pass A30 clone are on hold pending payment.
The BrianGT LM3875 and remote pre are pending another sale.
I do have a second set of boards and components from the Mini-A / A30 group buy. Along with that I have some heat sinks a toroid and BrianGT pwr supply PCB (awesome PCB). I will photograph that tomorrow and post it here.
No one has asked about the Krell KSA-50 clone and I am actually pretty happy about that as that is the project I REALLY wanted to build. But again, I don't think I will have that chance for many years now so no use holding on to past dreams.
Anyway, the Rev_C (man I loved this one), the BrianGT LM3886, and Pass A30 clone are on hold pending payment.
The BrianGT LM3875 and remote pre are pending another sale.
I do have a second set of boards and components from the Mini-A / A30 group buy. Along with that I have some heat sinks a toroid and BrianGT pwr supply PCB (awesome PCB). I will photograph that tomorrow and post it here.
No one has asked about the Krell KSA-50 clone and I am actually pretty happy about that as that is the project I REALLY wanted to build. But again, I don't think I will have that chance for many years now so no use holding on to past dreams.
Everything has been placed in "sale pending" state EXECPT the second Pass Mini-A A30 kit. It is the same as the first MINUS the chassis. It has heat sinks, but the buyer will have to fab a cabinet or buy a premade and bolt the heat sinks to the sides..
- Status
- Not open for further replies.