"audiophile grade 2-way monitor amp...Using all polystyrene / polypropylene caps, etc"
AP-016A
2way Amp 80w + 30w 2KHz xover
AP-016B
2way Amp 80w + 30w 2.7KHz xover
AP-016C
2way Amp 80w + 30w 3.5KHz xover..
http://www.solen.ca
Any feedback yet?
AP-016A
2way Amp 80w + 30w 2KHz xover
AP-016B
2way Amp 80w + 30w 2.7KHz xover
AP-016C
2way Amp 80w + 30w 3.5KHz xover..
http://www.solen.ca
Any feedback yet?
I saw & heard one briefly on an MTM with CSS WR125ST + ribbon (IIRC). The demo was overshadowed by a single FR125STeN in a 7 liter aperiodically vented box (can't blame that on the amp)
The concept is really good (althou in a speaker box is not the best place for an amp microphonics-wize). I just wish they had more versatility in terms of the XO. They are aimed at "traditional" 2-ways... i'm more interested in XOs 200-400 Hz.
dave
The concept is really good (althou in a speaker box is not the best place for an amp microphonics-wize). I just wish they had more versatility in terms of the XO. They are aimed at "traditional" 2-ways... i'm more interested in XOs 200-400 Hz.
dave
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.