My toroid and pcb are at opposite ends of the chassis....but then my chassis is radically different from what most of you have done anyway.....I could have put the pcb and transformer next to each other, but it didn't make sense. I have a very small amount of hum and may try surrounding the toroid with a copper ring, or having some steel cans spun to enclose them completely for best shielding. Needless to say the front panels and anodizing are still to come......
Mark
Mark
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.