• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Aikido LV Tube Pre w/ EH 12BH7s and MeanWell PS

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
SOLD - Aikido LV Tube Pre w/ EH 12BH7s and MeanWell PS

Had this for years and it's just collecting dust, so putting it up for someone else to enjoy/tinker. Resistor values are for the 12BH7s and include PRPs, Shinkoh, Takman, Dale, and even some Radio Shack (!). Basically whatever I had laying around. .

Tubes should have plenty of life left in them. The Meanwell is the 48v smps specified by Broskie. The DC connector was snipped for direct attachment.

Coupling caps not provided.

It should power up just fine as is, but you'll want to want to double check and make sure values meet your needs. It's not set it and forget it.

$old. Paypal. US.
 

Attachments

  • Aikido 3.jpg
    Aikido 3.jpg
    693.2 KB · Views: 177
  • Aikido 2.jpg
    Aikido 2.jpg
    508.6 KB · Views: 173
Last edited:
Had this for years and it's just collecting dust, so putting it up for someone else to enjoy/tinker. Resistor values are for the 12BH7s and include PRPs, Shinkoh, Takman, Dale, and even some Radio Shack (!). Basically whatever I had laying around. .

Tubes should have plenty of life left in them. The Meanwell is the 48v smps specified by Broskie. The DC connector was snipped for direct attachment.

Coupling caps not provided.

It should power up just fine as is, but you'll want to want to double check and make sure values meet your needs. It's not set it and forget it.

$85 shipped. Paypal. US.
You have a pm
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.