List unpaid
In the list below, please pay me, so I send the goods to you:
1.NicMac: 1 set (possibly also the transformers) + shipping (20usd) = 406usd
2. flowerpot: 1 set + shipping (20usd) = 406usd
3. nkdk: 3set. Pcb + shipping (10usd) = 75usd
4.juju35135 : 1 set => 1(25$)+5(5$)+6(7$)+Amareno(60$)+ shipping(10$) = 107 $
5.Necplusultra: set Lundal (406usd) + 02 tranformer (40usd/each), total: 406 + 80 + 70usd shipping = 556usd
6. SalvationMen: 2pcb = 35usd
Please pay me, I will ship goods to you as soon as I get enough money.
Thank you!
In the list below, please pay me, so I send the goods to you:
1.NicMac: 1 set (possibly also the transformers) + shipping (20usd) = 406usd
2. flowerpot: 1 set + shipping (20usd) = 406usd
3. nkdk: 3set. Pcb + shipping (10usd) = 75usd
4.juju35135 : 1 set => 1(25$)+5(5$)+6(7$)+Amareno(60$)+ shipping(10$) = 107 $
5.Necplusultra: set Lundal (406usd) + 02 tranformer (40usd/each), total: 406 + 80 + 70usd shipping = 556usd
6. SalvationMen: 2pcb = 35usd
Please pay me, I will ship goods to you as soon as I get enough money.
Thank you!
Quanghao,
Payment of $60.50 sent via PayPal for the rest of the parts EXCEPT transformers. Boards were paid for previously when I paid for my DAC.
These should be sent with my completed DAC.
Thank you!
Kind regards,
Steve
Hi Quanghao,
If use input transformer like this:
http://datasheet.octopart.com/TPAS-203-Tamura-datasheet-13054601.pdf
and
Digital Home Recording
or use
ÈÕ±¾ ÌúľÀ¼ TAM RADIO TAMURA ÊäÈëÅ£TPC-202 600CT£º600CT-ÌÔ±¦Íø
is OK?
Thank you.
B.R
Antony
If use input transformer like this:
http://datasheet.octopart.com/TPAS-203-Tamura-datasheet-13054601.pdf
and
Digital Home Recording
or use
ÈÕ±¾ ÌúľÀ¼ TAM RADIO TAMURA ÊäÈëÅ£TPC-202 600CT£º600CT-ÌÔ±¦Íø
is OK?
Thank you.
B.R
Antony
Quanghao,
I already sourced the transformers so i only need the 2 PCBs + shipping to Italy. Please let me know the cost and I will PayPal you immediately.
Thanks,
Nic
Nic, it should be $25 + $10 airmail = US$35.
https://docs.google.com/document/d/1t4vJSmbHi6-DiN_gBbVBp8HB89h0bklPwfVQal2Maa8/edit?pli=1
Cap for board?
I know this was asked before: is a 2.2uf ok for the C4/C9 positions on the board? I have two 2.2uf Mundorf's left over from another project, is that ok to use on C4/C9? The kit uses 10uf (as Andrea's setup), but someone else made the comment that they didn't see the need for anything larger than 2.2uf. Thanks.
I know this was asked before: is a 2.2uf ok for the C4/C9 positions on the board? I have two 2.2uf Mundorf's left over from another project, is that ok to use on C4/C9? The kit uses 10uf (as Andrea's setup), but someone else made the comment that they didn't see the need for anything larger than 2.2uf. Thanks.
Dear quanghao,
I had paid 35 usb via paypal on 18, March and I see nothing coming. Have you sent the packet to Taiwan ? Thank in advance.
I had paid 35 usb via paypal on 18, March and I see nothing coming. Have you sent the packet to Taiwan ? Thank in advance.
Tomorrow morning, I will send it to you!
Be sympathetic and wait!
would like to thank you very much!
quanghao