• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

The best preamplifier

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
quanghao

quanghao

Member
Joined 2009
quanghao.com/
frankwilker said:
Hi quanghao,

i have some questions. At the output is used a 4,7uf Capacitor. Why are you using this large value?
The capacitorat the grids are 1k. I think its the protection for oscillation. So this value is not critical. I want to use 150 Ohm, cause i have this in stock.

with best regards
Click to expand...

Well ! thank you!

parallel installation of multiple tube, with my experience 4.7uF or greater value to 6uF, will sound impressive bass solution, more capacitors 0.01uF create the subtle sound high!

You can use the R value from 100 to 2K, no matter what!
Wish you success!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom