Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Quanghao Audio Design Quanghao Audio Design is a producer of DIY Audiophile Kits and PCB boards, selected from many listening tests!

Reply
 
Thread Tools Search this Thread
Old 28th July 2010, 06:20 AM   #1901
BudP is offline BudP  United States
diyAudio Member
 
BudP's Avatar
 
Join Date: Feb 2007
Location: upper left crust, united snakes
OLD THREAD DAC End by Andrea Ciuffoli
Here are the four choices. All within the same core size range.

Fig 1 is a bare coil, 9.3 kg flux load with copper strap wrapped around coil and adjacent core.

Fig 2 is the same mounted within one piece end bells

Fig 3 is full shielding and 9.7 kg flux load. Channel frame mounting.

Fig 4 is a bare coil, 9.3 kg flux load with copper strap wrapped around coil and adjacent core. Channel frame mounting.
Attached Files
File Type: pdf DAC power transformer footpri...pdf (37.9 KB, 86 views)
__________________
"You and I and every other thing are a dependent arising, empty of any inherent reality" Tsong Ko Pa
  Reply With Quote
Old 28th July 2010, 06:24 AM   #1902
quanghao is offline quanghao  Viet Nam
diyAudio Member
 
Join Date: Sep 2009
Location: Vietnam
OLD THREAD DAC End by Andrea Ciuffoli Send a message via Yahoo to quanghao OLD THREAD DAC End by Andrea Ciuffoli
Quote:
Originally Posted by BudP View Post
Here are the four choices. All within the same core size range.

Fig 1 is a bare coil, 9.3 kg flux load with copper strap wrapped around coil and adjacent core.

Fig 2 is the same mounted within one piece end bells

Fig 3 is full shielding and 9.7 kg flux load. Channel frame mounting.

Fig 4 is a bare coil, 9.3 kg flux load with copper strap wrapped around coil and adjacent core. Channel frame mounting.
one 9.3 kg???
it is very heavy!
  Reply With Quote
Old 28th July 2010, 07:30 AM   #1903
BudP is offline BudP  United States
diyAudio Member
 
BudP's Avatar
 
Join Date: Feb 2007
Location: upper left crust, united snakes
OLD THREAD DAC End by Andrea Ciuffoli
Sorry, 9.3 kilogauss... not kilograms.
__________________
"You and I and every other thing are a dependent arising, empty of any inherent reality" Tsong Ko Pa
  Reply With Quote
Old 28th July 2010, 05:27 PM   #1904
phrarod is offline phrarod  United States
diyAudio Member
 
Join Date: Aug 2005
On another note - OSCON SP 47uF/16v caps.

Through my company I was able to buy a bag of them. I'll have around 50 to sell as its too many for me to use. This is directly from a distributor so no worries about being knock offs.

Its probably a best deal for NA/SA since Farnell as explained earlier sells them is small quantities in England.

Farnell sells them for $3.90 ea plus s/h

I will sell them for $2.00/ea plus shipping. PM me if you are interested.

Again these are the Audio Grade SP versions. Other versions such as SA, etc are not the audio grade.
  Reply With Quote
Old 28th July 2010, 05:42 PM   #1905
klaju1955 is offline klaju1955  Brazil
diyAudio Member
 
Join Date: May 2007
Location: Brazil Recife
Quote:
Originally Posted by phrarod View Post
On another note - OSCON SP 47uF/16v caps.

Through my company I was able to buy a bag of them. I'll have around 50 to sell as its too many for me to use. This is directly from a distributor so no worries about being knock offs.

Its probably a best deal for NA/SA since Farnell as explained earlier sells them is small quantities in England.

Farnell sells them for $3.90 ea plus s/h

I will sell them for $2.00/ea plus shipping. PM me if you are interested.

Again these are the Audio Grade SP versions. Other versions such as SA, etc are not the audio grade.
you have a foto of the caps, I´ve bought on Ebay and the seller says they are SP, but I didn´t see nothing declared on the cap like SP, only a G?

Klaus
  Reply With Quote
Old 28th July 2010, 07:15 PM   #1906
phrarod is offline phrarod  United States
diyAudio Member
 
Join Date: Aug 2005
The lettering should be gold. I don't have them yet. When I get them I'll photograph them. For now look at partsconnexion... Capacitors_Electrolytic_Sanyo_Oscon

I also bought some a while back after being told they were SP, but they're not. They have a G and the lettering is gray. All SP have gold lettering to my knowledge. SP is the only one specifically for Audio in the organic series.
  Reply With Quote
Old 28th July 2010, 08:26 PM   #1907
klaju1955 is offline klaju1955  Brazil
diyAudio Member
 
Join Date: May 2007
Location: Brazil Recife
Quote:
Originally Posted by phrarod View Post
The lettering should be gold. I don't have them yet. When I get them I'll photograph them. For now look at partsconnexion... Capacitors_Electrolytic_Sanyo_Oscon

I also bought some a while back after being told they were SP, but they're not. They have a G and the lettering is gray. All SP have gold lettering to my knowledge. SP is the only one specifically for Audio in the organic series.
Mine a like the gray ones you´ve bought, now I saw another offering them like SA. There are a lot of sh... goods and sellers on Ebay.

Reserve 10 for me, please.

Regards

Klaus
  Reply With Quote
Old 28th July 2010, 08:31 PM   #1908
phrarod is offline phrarod  United States
diyAudio Member
 
Join Date: Aug 2005
Klaus. Will do but PM me so I can keep a list. I know what you mean about eBay. I have a drawer of bogus parts I bought and they know its too much of a hassle to return. That's why I wanted to offer the real deal to people here.
  Reply With Quote
Old 29th July 2010, 01:24 AM   #1909
quanghao is offline quanghao  Viet Nam
diyAudio Member
 
Join Date: Sep 2009
Location: Vietnam
OLD THREAD DAC End by Andrea Ciuffoli Send a message via Yahoo to quanghao OLD THREAD DAC End by Andrea Ciuffoli
Hi phrarod!
you can make groub by Os-con 47uF Sp in this topic???

Many member like it!
Thank
http://www.quanghao.com
  Reply With Quote
Old 29th July 2010, 02:56 AM   #1910
Strosek is offline Strosek  Canada
diyAudio Member
 
Join Date: Sep 2009
Quote:
Originally Posted by phrarod View Post
Klaus. Will do but PM me so I can keep a list. I know what you mean about eBay. I have a drawer of bogus parts I bought and they know its too much of a hassle to return. That's why I wanted to offer the real deal to people here.
Count me in for 10 and as you said I'll also send you a PM.


Thanks!
  Reply With Quote

Reply


OLD THREAD DAC End by Andrea CiuffoliHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
OLD THREAD Hi-end phono preamplifier by Andrea Ciuffoli quanghao Quanghao Audio Design 417 15th October 2016 11:42 PM
Cleo: End to End 24bit 192khz USB DAC with tube output bcherry DIY HiFi Supply 7 3rd July 2010 11:15 PM
The DAC End 2 by Andrea Ciuffoli pcb + most parts... prooptiki Swap Meet 7 31st May 2010 02:21 AM
Custom designed transformer for Andrea Ciuffoli 6c33c OTL AMP.... zxcxz Tubes / Valves 2 10th July 2009 04:14 PM
Andrea Ciuffoli Mosfet Amp DieterD Solid State 16 24th December 2001 05:56 AM


New To Site? Need Help?

All times are GMT. The time now is 03:02 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki