Hi,
I scanned a project from one of my Tetsuo Nagaoka books, for a flat back loaded horn using the FE103s. You can get the scanned PDF at:
http://lucidstupid.com:2082/fronten...idstu/projects&file=Tetsuo Nagaoka - D-XX.pdf
I was considering putting one of these together, and thought I'd ask the experts here if they've any tips to share. My Japanese is passable, but not good enough to read all of it without spending a weekend with my nose in a dictionary.
It's also an offering for any Nagaoka fans out there who don't have access to his books. I'll take it down after a month or so, to avoid potential copyright troubles.
Please let me know if you have any constructive comments, and the sooner the better... (before I start cutting wood!) It's meant to be present.
Thanks,
Jason
I scanned a project from one of my Tetsuo Nagaoka books, for a flat back loaded horn using the FE103s. You can get the scanned PDF at:
http://lucidstupid.com:2082/fronten...idstu/projects&file=Tetsuo Nagaoka - D-XX.pdf
I was considering putting one of these together, and thought I'd ask the experts here if they've any tips to share. My Japanese is passable, but not good enough to read all of it without spending a weekend with my nose in a dictionary.
It's also an offering for any Nagaoka fans out there who don't have access to his books. I'll take it down after a month or so, to avoid potential copyright troubles.
Please let me know if you have any constructive comments, and the sooner the better... (before I start cutting wood!) It's meant to be present.
Thanks,
Jason
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.