So i'm starting my first DIY project this weekend. I'm making a 48" x 48" baffle from 5/8" mdf. The center will have a 12" x 12" square cutout for mounting drivers on various size insets.
Couple questions: Should I flush mount drivers on the inset?
Does anyone cover the baffle face with felt or just leave it bare?
Any other tips for making the baffle?
Thanks, Brandon
Couple questions: Should I flush mount drivers on the inset?
Does anyone cover the baffle face with felt or just leave it bare?
Any other tips for making the baffle?
Thanks, Brandon
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.