After I read on Linkwitz pages I decided to make an active filter for my dipoles bass drivers.The design will be the same with Quasar,only back will be more open air.
http://www.dipolplus.de/thema9.htm
Filter is for them because for main driver I will go without filter.
I want to keep the same structure of filter but my concern is about 290NF - Notch filter with 2.5 H inductor to equalize 1/4 wavelength peak of 1/2 cabinet length transmission line.
I know that option is for Orion bass dipole design and I wonder if in my case that will be suitable.
What do you think?
Thx. Jussi.
http://www.dipolplus.de/thema9.htm
Filter is for them because for main driver I will go without filter.
I want to keep the same structure of filter but my concern is about 290NF - Notch filter with 2.5 H inductor to equalize 1/4 wavelength peak of 1/2 cabinet length transmission line.
I know that option is for Orion bass dipole design and I wonder if in my case that will be suitable.
What do you think?
Thx. Jussi.
Attachments
Jussi,
I have not looked into that Linkwitz filter architecture, but for a Quasar style OB you definitely don´t need any notch filter and no equalizing of any 1/4 wavelength peak.
I believe that this filter from the Phoenix woofer http://www.linkwitzlab.com/proto.htm#PW1 would be good enough:
Rudolf
I have not looked into that Linkwitz filter architecture, but for a Quasar style OB you definitely don´t need any notch filter and no equalizing of any 1/4 wavelength peak.
I believe that this filter from the Phoenix woofer http://www.linkwitzlab.com/proto.htm#PW1 would be good enough:
Rudolf
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.