I'm working a ton of overtime for the next two months and will only have a few minutes each night to play with my speakers. So for a quick toy, I was looking at building a couple of sosntube type subs. The vendors in the area that sell the sonotube are not open during my off hours, but homedepot and another local are. I found the concrete forms there, but I was wondering on the wall thickness of the sonotubes.
Can anyone giver me the wall thickness of the sonotubes, the forms I found may work, but I want to be sure.
Thanks in advance.
Can anyone giver me the wall thickness of the sonotubes, the forms I found may work, but I want to be sure.
Thanks in advance.
There's a size chart on their site here (PDF): http://www.sonoco.com/resources/fibreforms.pdf
Though the ones I've seen at Home Depot were not Sonotubes, they were Quickrete forms, and the walls on those were much thinner.
Though the ones I've seen at Home Depot were not Sonotubes, they were Quickrete forms, and the walls on those were much thinner.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.