I am going for antoher housing for my Aleph-X project.
So I'm putting these four large heatsinks for sale.
I bought them from another guy who had them cut larger at the factory.
They are seifert kl-271, but 29cm high.
So dimensions are: 30cm(W)*29cm(H)*8,35cm(D). The weight is around 12kg a piece.
Look at heatsink but not 20cm, but 29 cm
I am asking 150EUR for the 4 of them (excl shipment)
Because of the weight, I think shipment overseas is not an option.
btw, the previous owner made some bars on them, so they are two by two connected. Of course they can be removed.
So I'm putting these four large heatsinks for sale.
I bought them from another guy who had them cut larger at the factory.
They are seifert kl-271, but 29cm high.
So dimensions are: 30cm(W)*29cm(H)*8,35cm(D). The weight is around 12kg a piece.
Look at heatsink but not 20cm, but 29 cm
I am asking 150EUR for the 4 of them (excl shipment)
Because of the weight, I think shipment overseas is not an option.
btw, the previous owner made some bars on them, so they are two by two connected. Of course they can be removed.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.