My new wooden gainklone

[DT]

Hi to all,

finally i made my first gainklone. This is inverted configuration amp with only 2 resistors ant 1000uF cpacitors (silmic II) - Peter Daniel minimalist schematic.
Now this amp works from 4 12V akku PS.

I am more then satisfied with sound quality - bright, nice and clear sound. Thats what i can say.

Many thanks to all of you guys for speaking here about your chip amps and impressions. Thanks for inspirations.

some Photos of my amp.

 

[Nuuk]

That's very nice work Danius, as is the rest of your hi-fi!

There is something about using wood for hi-fi that looks just right (although I know the arguments against it on safety grounds).

You must be very happy with your Gainclone!

 

[G4ME]

also enjoy the wood cases.

BTW that looks like you are using 4 12V batteries to power the GCs. How long do they last on a charge?

 

[Leolabs]

remind me of Holfi .U call name it "Holfi Gainclone".

 

[dhenryp]

Very nice look and very well done! Are any filter capacitors really needed with batteries for a PS?

 

[DT]

thanks, i am really very happy with my gainclone.

i am listening my amp in total 30-40hours and voltage is 12.6V each cell. so akkus are still alive.

leolabs, my english is very bad so i dont know what "holfi" means ???

this amp was made for using it with transformers so i put it with akkus just temporary.
i am planing to make NIGC with only 47uF BGN capacitors and tis akku PS.

anyway this is the best amp i ever heard.

again, thanks to all of you, Peter Daniel, NUUK, Carlos and many others.

 

[G4ME]

I am not familiar with the term "akkus", some one care to enlighten me.

 

[Nisbeth]

I am not familiar with the term "akkus", some one care to enlighten me.

Akkus = rechargeable batteries


/U.

 

[Leolabs]

Holfi is a well known audio manufacturer from Denmark