diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Swap Meet (http://www.diyaudio.com/forums/swap-meet/)
-   -   wanted (http://www.diyaudio.com/forums/swap-meet/56637-wanted.html)

hau 4th May 2005 07:36 AM

wanted
 
2 Attachment(s)
hi

im planning to build a multichannel pre-amp and I'm looking for a optical rotary encoder, it is not important if it is new or second-hand as long it is in perfect working condition.

since i don't have creditcard or paypal, im trading my pair of lm3875 gainclone kit, or some of my devices, i have(12pcs of opa627BP, 9pcs opa637, 2pcs PIC16f877 and 2pcs PIC16f84.

im also looking for other devices that you think i can use for my project (LCD/VFD, connectors, etc)

Please make an offer, thanks for looking....

hau 4th May 2005 12:11 PM

2 Attachment(s)
another picture

hau 4th May 2005 12:57 PM

2 Attachment(s)
sorry about the quality of the pic's it was taken using the camera of a cellphone

Bernhard 4th May 2005 08:43 PM

Hi, how many pulses per turn ?

hau 6th May 2005 07:18 AM

hi

about 128 cycles per revolution.

hau 7th May 2005 10:00 AM

hi

:scratch2: im thingking about any cycles, i just really need a optical encoders right-away.:bawling: im begging, please help me finish my project. :headbash:

thanks, i beg you please reply!....... :bawling:

Bernhard 7th May 2005 01:05 PM

Hey, I will look if I can help.
Have anything to trade ?

hau 7th May 2005 02:31 PM

hi:wave2:

look at my first post if you like those devices, if not tell me what devices you want, :Popworm:i will see if i have the devices you need.

and by the way tell me if you have other devices you think is suited for the digital pre-amp

thanks a lot !......... :D

hau 9th May 2005 11:52 AM

anyone? please

Bernhard 9th May 2005 12:47 PM

Look what I have found :D

Sticker is a little scratchy but device is ok. shaft diameter is 3,14mm, attached cable about 50cm long, foutr holes for mounting with screws. M2,5 or M3, did not try.

100 pulses per turn per channels A & B and one per turn, channel C.

Supply 12V gives cmos compatible signal 4V high level.

I look for PCM52 ceramic dip and DAC71-CSB or COB ceramic dip.
But as you probably may not have any of those I might be interested in any interesting DAC chips or OPA627, make me an offer.

http://www.beautyphoto.de/encoder.jpg


All times are GMT. The time now is 09:57 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki