GP on Aluminum enclosure for pre and amp

[jrsun]

Hi,

I'm going to set up a wiki to see the feasibility of GP on pre and amp enclsoure. It is just a POLL, not order. The price is tentative but probably very close to final price. Thanks!

5 different enclosures

1. 60mm/pre-amp: original aluminum color or black color: $80 + shipping
for details go to http://www.diyaudio.com/forums/showthread.php?s=&threadid=38231
2. 100mm/pre-amp: original aluminum color or black color: $120 + shipping
for details go to http://www.diyaudio.com/forums/showthread.php?s=&threadid=36835
3. 130mm/amp: original aluminum color or black color: $120 + shipping
H130mmxD360mmxW390mm
4. class-A amp (up to 100W): black color
5. class-A amp (up to 150W): black color

wiki, please go to
http://www.diyaudio.com/wiki/index.php?page=2005+GP+in+enclosure

Please put down your number before 02/28/2005.
Once I collect the numbers, I'll negotiate the price (hopefully lower) with manufacture and post them for the final order, probably the end of march.

 

[jrsun]

4. class-A amp (up to 100W): black color
H310mmxW300mmxL300mm; phin 40mm

 

[jrsun]

more pic on class A (100w): $450 + shipping

 

[scone]

Is that $80 + shipping for just the chassis, or the chassis with the connectors shown on the the pages you linked?

Also, who is the manufacturer?

 

[jrsun]

Is that $80 + shipping for just the chassis, or the chassis with the connectors shown on the the pages you linked?

3 pairs of RCA, feet, 3-in-1 power switch are included, please check the updated wiki page

Originally posted by scone
Also, who is the manufacturer?

OEM for name barnd in Taiwan

 

[scone]

so the rca jacks and power module come installed in the chassis? who's doing the installation, the OEM manufacturer? i have too many questions, i know...

 

[tiroth]

Is #3 same as #1 and #2, just bigger/different knockouts?

 

[jrsun]

so the rca jacks and power module come installed in the chassis? who's doing the installation, the OEM manufacturer? i have too many questions, i know...

Do not worry ! you can install them within minutes.

 

[jrsun]

Is #3 same as #1 and #2, just bigger/different knockouts?

#3 is targeted for class AB amp so comes with RCAs and speaker binding post
#1 are #2 are targeted for pre-amp, so come with RCAs (and
XLRs)
However, I used #2 for gainclone putting binding posts in RCA holes without problem

 

[scone]

However, I used #2 for gainclone putting binding posts in RCA holes without problem

That's what I'm planning on using #1 for . You could save yourself some trouble and ship the chassis, rca, and power module unassembled, and let the end user install the rcas themselves. Anyway, it would probably work out better for me, since then I could customize it at any point in the future if I decide to use the chassis for something other than an amp, etc.

 

[jrsun]

Originally posted by scone
That's what I'm planning on using #1 for .

make sure the transform is lower than 60mm

Originally posted by scone
You could save yourself some trouble and ship the chassis, rca, and power module unassembled, and let the end user install the rcas themselves. Anyway, it would probably work out better for me, since then I could customize it at any point in the future if I decide to use the chassis for something other than an amp, etc.

exactly!

 

[gruvytune]

i'm looking to make 4 mono amps (class D)
i'm assuming the class A amps will house such a project

torin

 

[jrsun]

Basically, I'll keep updating info here and wiki.
For example, I do not have size, picture and price information for #5 class A (150W), at least I need update those.

Tentative schedule are as follows
1. collect order/poll up to 02/28/2005
2. post updated prices on 03/15/2005
3. make your change as you wish and pay 25% deposit until 03/31/2005 by paypal from bank account or check
4. finalize order on 03/31/2005
5. normally, product will be available 60 days from then

Thanks!

 

[Jean]

Updated Wiki .

 

[frasse]

How much for shiping to sweden? Im intrestead in atleast 1 of nr1 and 1 of nr 3.

 

[jrsun]

How much for shiping to sweden? Im intrestead in atleast 1 of nr1 and 1 of nr 3.

shipped by U.S. mail for international orders (no insurance provided by USPS, sorry !) for estimate of postage please go to http://www.usps.com

 

[lgreen]

3 and 5 missing?

1. 60mm/pre-amp: original aluminum color or black color: $80 + shipping
for details go to http://www.diyaudio.com/forums/show...&threadid=38231
2. 100mm/pre-amp: original aluminum color or black color: $120 + shipping
for details go to http://www.diyaudio.com/forums/show...&threadid=36835
3. 130mm/amp: original aluminum color or black color: $120 + shipping
H130mmxD360mmxW390mm
4. class-A amp (up to 100W): black color
5. class-A amp (up to 150W): black color

Looks like pictures of #1, #2, and #4 were posted.

Are there any for #3 and #5 (I see that 5 is coming...)?

 

[jrsun]

Re: 3 and 5 missing?

Looks like pictures of #1, #2, and #4 were posted.

Are there any for #3 and #5 (I see that 5 is coming...)?

#3 was shown in post #16 and #17 of
http://www.diyaudio.com/forums/showthread.php?s=&threadid=36835&perpage=10&pagenumber=2

I'm working on the #5, the sample looks great but the weight ...

 

[jrsun]

rpafenberg,

no holes on front face but holes on rear are there ! Sorry, can not be customized !

 

[sanjeev]

can't edit WIKI

I am interested in one black 100mm preamp enclosure.
I was unable to edit the WIKI page. I am in NJ.

Thanks