Hi All-
I was wondering if anyone knows of a CAD program which is tube compatible, and either free, or at low-cost.
I am not at all artistic, my hand-drawn straight lines are skew, my resistors look like a drunken worm, my caps are reasonable, and coils & transformers are well-nigh impossible for me to draw freehand.
-Eric
I was wondering if anyone knows of a CAD program which is tube compatible, and either free, or at low-cost.
I am not at all artistic, my hand-drawn straight lines are skew, my resistors look like a drunken worm, my caps are reasonable, and coils & transformers are well-nigh impossible for me to draw freehand.
-Eric
If you want real-time Spice simulation for tube projects, check out:
http://www.microcode.com/downloads/student.htm
There are tons of custom made spice models for other tubes available from the web, like from here:
http://home.netcom.com/~wb2jia/tubes/spice.txt
and
http://www.duncanamps.com/spicevalves.html
I have a few too that I should post some day
http://www.microcode.com/downloads/student.htm
There are tons of custom made spice models for other tubes available from the web, like from here:
http://home.netcom.com/~wb2jia/tubes/spice.txt
and
http://www.duncanamps.com/spicevalves.html
I have a few too that I should post some day
The PCB cad package Eagle (from www.cadsoft.de) has a free library of tube symbols available for download on their website.
/U.
/U.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- CAD Program for Tubes