wanted 2SA1302/2SC3281 models for Multisim student

[thanh]

This version has no power transistor models. Can you give me some models? Thank you!

 

[cunningham]

This version has no power transistor models. Can you give me some models? Thank you!

Look for a semiconductor cross reference guide online.

 

[Netlist]

.MODEL 2SA1302 PNP (IS=10F BF=129.738 VAF=100 IKF=16 ISE=0.414467F NE=1.12865
+ BR=10 IKR=9.99995 ISC=2.16381N NC=2.21849 RE=1 RC=149.165M CJE=2P MJE=500M
+ CJC=1.83549N VJC=699.998M MJC=499.587M TF=6.72889N XTF=444.956M VTF=10.5982
+ ITF=1.13444P TR=10N )

.MODEL 2SC3281 NPN (IS=10F BF=107.06 VAF=100 IKF=16.941 ISE=0.578669F
+ NE=1.14481 BR=10 IKR=1.04175 ISC=1.218480E-020 NC=2.99843 RE=1 RC=30.7022M
+ CJE=2P MJE=500M CJC=1.05579N VJC=700M MJC=500.059M TF=4.16856N XTF=500M
+ VTF=10 ITF=10.4762M TR=10N )

/Hugo

 

[thanh]

Thank you! Netlist!
I used Orcad's models for Multisim but it inogred NK parameter and alert. I deleted NK but SIM work unstable

 

[sam9]

Just in case you decide to actually build something using these transistors, do a search in this form regarding fake or counterfeit transistors. Be cautious where you get yours.

 

[classd4sure]

Hi,

You need Xspice models for multisim, hard to find no one really offers them, good reason for not using multisim.

 

[thanh]

good reason for not using multisim.

Why? accuracy or speed

 

[mikeks]

.MODEL 2SA1302 PNP (IS=10F BF=129.738 VAF=100 IKF=16 ISE=0.414467F NE=1.12865
+ BR=10 IKR=9.99995 ISC=2.16381N NC=2.21849 RE=1 RC=149.165M CJE=2P MJE=500M
+ CJC=1.83549N VJC=699.998M MJC=499.587M TF=6.72889N XTF=444.956M VTF=10.5982
+ ITF=1.13444P TR=10N )

.MODEL 2SC3281 NPN (IS=10F BF=107.06 VAF=100 IKF=16.941 ISE=0.578669F
+ NE=1.14481 BR=10 IKR=1.04175 ISC=1.218480E-020 NC=2.99843 RE=1 RC=30.7022M
+ CJE=2P MJE=500M CJC=1.05579N VJC=700M MJC=500.059M TF=4.16856N XTF=500M
+ VTF=10 ITF=10.4762M TR=10N )

/Hugo

Hi Hugo..

Where did you get these models?

Mike.

 

[Netlist]

As you must have seen from many posts, I’m a collector of data…
Just ask and I usually respond when I spot the post.

/Hugo

 

[mikeks]

...and the answer is...?