Busted BW DM4s

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello community

my beloved BnW DM4s have blown, due to a forgotten condenser mic and an amp at full volume.

They had fuses in the back with a higher amperage than the originals, which I had intended to eventually replace with the normal 2A but forgot about...

At first they were making this weezy sort of pathetic noise, then the signal stopped altogether. I thought they were completely ******, but after changing the fuses they are still making noise.

Does this mean that I can just replace drivers, or could there potentially be damage to crossover as well?

I've never done any speaker repair, so any fingers in the right direction would be great!

Thanks
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.