Well. Topic says it all.
At www.Elfa.se the only one they have is Wima FKP 2 (http://www.elfa.se/elfa/produkter/no/2012662.htm), but the max value of 0,033u is too low for my needs (linkwitz transform circuit).
The Icel MPL (http://www.elfa.se/elfa/produkter/no/2012668.htm)have 1% tolerance, but their sizes are too large (axial).
Any tips?
At www.Elfa.se the only one they have is Wima FKP 2 (http://www.elfa.se/elfa/produkter/no/2012662.htm), but the max value of 0,033u is too low for my needs (linkwitz transform circuit).
The Icel MPL (http://www.elfa.se/elfa/produkter/no/2012668.htm)have 1% tolerance, but their sizes are too large (axial).
Any tips?
peranders said:Do you _really_ need 2.5%? I think that RIFA PHE426 5% is pretty good. I have a little hunch of that RIFA is substantially better than 5% in real life.
My thoughts excactly. Also, you can always match them yourself
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.