I have 3 P3A boards from Rod Elliot. I cut them in half, for 6 separate channels, but they are otherwise as received. I decided to have boards made, with crossovers & amps combined, and only build 4 channels.
The documentation CD will be included, along with these components:
4 pr fuse clips & 6 pcs 3A fast-acting fuses
2 pcs Vishay/Spectrol 2K top-adj trim-pot
2 small green LEDs
4 pcs 100pF/1KV Vishay/Sprague Ceramite caps
ELNA Silmic e-caps: 2 pcs 330uF/50V & 2 pcs 100uF/25V
2 pcs AudioNote tantalum 22K 1/2-W resistors
2 pcs Solen SM/SE 0.1uF/630V poly caps (not metallized)
8 pcs ON-Semi BC546BRL1
10 pcs ON-Semi MJE15034
15 pcs ON-Semi MJE15035
20 pcs each ON-Semi MJ15003 & MJ15004
$45 includes postage. Payment by PayPal only.
Sale restricted to US-48.
The documentation CD will be included, along with these components:
4 pr fuse clips & 6 pcs 3A fast-acting fuses
2 pcs Vishay/Spectrol 2K top-adj trim-pot
2 small green LEDs
4 pcs 100pF/1KV Vishay/Sprague Ceramite caps
ELNA Silmic e-caps: 2 pcs 330uF/50V & 2 pcs 100uF/25V
2 pcs AudioNote tantalum 22K 1/2-W resistors
2 pcs Solen SM/SE 0.1uF/630V poly caps (not metallized)
8 pcs ON-Semi BC546BRL1
10 pcs ON-Semi MJE15034
15 pcs ON-Semi MJE15035
20 pcs each ON-Semi MJ15003 & MJ15004
$45 includes postage. Payment by PayPal only.
Sale restricted to US-48.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.