Potentiometers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello everyone,

I plan on an amp design that uses potentiometers in the gain path, simular to NP's latest single stage complementary design.

What type is best, single or multi turn? What is closest to an ideal resistor? I see no capacitance or inductance values on spec sheets.

Any recommendations are much appreciated. I need ~200 ohms so I was thinking of paralleling ~300ohm resistor with a 2kohm multi turn pot.

Thanks,

Scott
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.