Hey folks this is my first post. I have a crossover that had a remote sub volume potentiometer. Worked great until the cord (carelessness) broke connection with the pot. My dilemma is a basic put 3 prongs. ..but I have 6 wires to deal with. Black. Blue. White. Green. Yellow.
Measuring from black as ground.....
Blk-ground
Blue +15
Red +15
Green +24
White +24
Yellow +1.xxx varies with the "level" on the cross over
I don't know. Just want to check and see if anyone knew so I could lean before I just call the company. .. but I don't think I would get a proper answer.
Thanks all. Dave
Crossover is planet audio EC10b
Measuring from black as ground.....
Blk-ground
Blue +15
Red +15
Green +24
White +24
Yellow +1.xxx varies with the "level" on the cross over
I don't know. Just want to check and see if anyone knew so I could lean before I just call the company. .. but I don't think I would get a proper answer.
Thanks all. Dave
Crossover is planet audio EC10b