sub not being driven enough?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
This is my first car audio install. I have a Clarion DXZ525, PG QX300.1 amp, and Bazooka single voice coil sub. All wires coming from the H/U are correct (when H/U is on, amp is on). The are no wires shorted out that I can find. The amp is bridged to the sub, but the sub seems like it isn't being driven enough. The amp is putting out 300W at 2 ohms, the sub can handle 300W. what could be the problem?

Hope it isn't too vague; Thanks for reading,
DL
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.