• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Problem with a model of WR125S

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
P

pegodk

Member
Joined 2012
Hello CSS!

I've recently bought a lot of drivers second hand including 2 FR125S and 2 WR125S. There's a problem with one of the WR125S though. The coil seems to be scratching the side of the phase plug making an ugly sound especially at high excursions. I've tried a couple of things (putting a rubber band around the coil to pull it into place for example) but nothing really seems to work. Do you have any ideas that could maybe help me?

Best regards
Peter
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom