diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Aleph 3 power consumption (http://www.diyaudio.com/forums/pass-labs/219541-aleph-3-power-consumption.html)

mercc 11th September 2012 05:09 PM

Aleph 3 power consumption
 
Hi,

I noticed on the consumption meter that the power consumption of Aleph 3 is about half of the usual value. The sound is a bit distorted. When I measured the value across the eight big transistors in power supply with voltmeter i get different values on each of the heatsinks and different from the values that is marked on them. Dont know what could be the problem.

Thank you for your response.

Zen Mod 11th September 2012 05:27 PM

more precise info , please

mercc 11th September 2012 06:27 PM

When Aleph 3 is connected into power consuption meter, turned on, power consumption is about 110 watts, previously when i powered it on consumption was about 250 watts. Also i noticed that one half of the heatsinks heat up another not, so now I found out that maybe problem is in one channel functional and another not.

Zen Mod 11th September 2012 06:47 PM

choose one of two opened threads, so we can proceed

mercc 11th September 2012 07:28 PM

So we can continue in the other thread if possible.


All times are GMT. The time now is 02:57 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki