Xtant 3150c accessory ports and balanced input (pin outs)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
P

Puggie

Member
Joined 2004
I have an Xtant 3150c here, nice system little amp and quite rare over here in the UK. The accessory modules are like hens' teeth and I really want a 2 or 3 band parametric. So my thought was to basically clone a couple of stages out of my AudioSystem PM-4 (4band parametric all SMT works well) and make my own accessory module. For this I really need to know the pin outs, I'm assuming its signal and earth x2 (left and right) and power which I'm guessing ±15v and earth. Anyone know the pin outs, audio level and how much power I can safely draw.

Likewise I'm modding a nak MB100 and may convert it to balanced output so what does the balanced input module look like?

Anyone done anything similar?

thanks of any assistance
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom