As you might know I have a Z400C4-SL (still) sitting here.
Zapco Z400C4-SL missing it's fan - diyAudio
After recaping the amp and fixing some corroded traces at least the clipping LEDs stay off and the TIP35/36 in one channel don't get hot anymore.
But I still get no sound from it.
Mine is missing the noisegate module.
From an friendly eBay-user I got a picture of a jumperboard that belongs in the crossover plug, when no crossovermodule is used.
So now I believe there is such an jumperboard for the noisegate, too.
Does anybody know if there is such a board?
The best would be if somebody could take some pictures of it!
Even pictures from the noisegatemodule could be helpful!
Thanks a lot!
Julian
Zapco Z400C4-SL missing it's fan - diyAudio
After recaping the amp and fixing some corroded traces at least the clipping LEDs stay off and the TIP35/36 in one channel don't get hot anymore.
But I still get no sound from it.
Mine is missing the noisegate module.
From an friendly eBay-user I got a picture of a jumperboard that belongs in the crossover plug, when no crossovermodule is used.
So now I believe there is such an jumperboard for the noisegate, too.
Does anybody know if there is such a board?
The best would be if somebody could take some pictures of it!
Even pictures from the noisegatemodule could be helpful!
Thanks a lot!
Julian
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.