• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Two 12" subwoofer cabinets (local pickup in Silicon Valley)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
D

davidespinosa

Member
Joined 2007
Two 12" sealed subwoofer cabinets built from birch ply. They measure roughly 17" on each side, so internal volume is roughly 2 cubic feet. The cabinets are super solid, with no air leaks. The cabinets have feet and T-nuts installed.

Optionally, the cabinets can include dual Dayton satin nickel binding posts (suitable for a dual voice coil driver) and a Dayton black anodized aluminum binding post plate. The cabinets are already cut out for these plates. This hardware costs $60 new from Parts Express.

An externally hosted image should be here but it was not working when we last tested it.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom