• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

EV HR9040 Horns (Australia)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
1 pr EV HR9040 Constant Directivity Horns

Big horns! Bolt pattern fits the Altec 1.4 inch and EV 1.3 inch drivers.

This link is not the actual pair for sale, but should give you an idea of the size:
Electro voice HR9040 overview | Flickr - Photo Sharing!

If you look at the photostream of the above flickr link there is a diagram of dimensions, etc.

These were written up in Sound Practices years ago as an alternative to Altec 1505s.

The pair I have for sale is in good condition, but a previous owner has taken flat black spray paint to them. Would need stripping or repainting to look acceptable in a lounge room. I can provide pictures, but since it's a pick up only deal, you may as well come out and look at them first hand.

Asking $300 AUD, pick-up only in Footscray VIC.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.