Box dimensions for in-wall Polk speakers?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
R

rabbitsincars

Member
Joined 2004
Hi Guys,

I tried emailing Polk to get specs to build boxes for the RC55i and RC85i as they are going to be hung on broad cement columns, and they only replied that I should use a 1.5 cubic foot box. Didn't specify if it was ported, length of port, etc. or supply me with basic specs to use to calculate. I am asking if anyone here would be willing to hazard a guess as to what size for each for a lightly stuffed closed box.

RC55i Specs Page : 5.25" two-way in-wall rectangular loudspeaker : Polk Audio

RC85i Specs Page : 8" two-way rectangular in-wall loudspeaker : Polk Audio

I know it is only a guess, and I would say erring on the side of a little too small with a slight bass hump but better power handling might be better.

Thanks.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom