Directed D800

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Heres the board out of the sink
 

Attachments

  • Picture 001.jpg
    Picture 001.jpg
    166.8 KB · Views: 63
  • Picture 002.jpg
    Picture 002.jpg
    146.8 KB · Views: 69
Ok got the amp to power up and produce audio but its very distorted.

I have both + - rail voltages at the outputs and have + - 15 on all opamps.

I replaced the switches and pots.

I have 0.93 volts across the emitter resistors Amps outputs is very distorted Any ideas?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.