I at least found the block diagram for the
LV-105u. Will it help? Perhaps.
Unfortunately I don't have a scanner, so I
can only summarize right now.
Looking at the block diagram, the CD direct
switch bypasses the Tape, Mode, Tone and
Balance controls. (The Signal Processor
In jack ought to also work, if the problem
is in any of those above-mentioned
controls.)
Another thing to check is that if you select
one of your other inputs, can you measure a
signal at the record outs? If not, it could
indicate a problem with the main selector
itself.
Drop me a line via email if you need
something very specific.
Best,
Erik
LV-105u. Will it help? Perhaps.
Unfortunately I don't have a scanner, so I
can only summarize right now.
Looking at the block diagram, the CD direct
switch bypasses the Tape, Mode, Tone and
Balance controls. (The Signal Processor
In jack ought to also work, if the problem
is in any of those above-mentioned
controls.)
Another thing to check is that if you select
one of your other inputs, can you measure a
signal at the record outs? If not, it could
indicate a problem with the main selector
itself.
Drop me a line via email if you need
something very specific.
Best,
Erik
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.