Adcom pre amp

[mavric]

hello everone!
I have an an Adcom preamp model# gtp 600, there is a push button that has given me issues, I would like to fix it. It is the " tone in" button that I am trying to fix. Part #'s, anything, any help would be nice.

 

[mavric]

I have replied to an email, the switch is #17 on the preamp, I cannot post pics as my camera was stolen. Apart # that I could use to replace it with is my goal. I cannot remember who sent the PDF file, so thank you very much, I have had the unit I bought used about 15 years ago, just needs a new switch, that says alot about Adcom if you ask me. Thanks everyone again, just want my theatre back.

 

[c2cthomas]

Have you contacted Adcom to see if they can help with a recommended part?

 

[mavric]

Honestly, I work six days a week, their hours of business, I am at work and un-able to call with any kind of tech question. I am curious if there was a way to simply "solder it" to the "on" posistion and be done with it. Thanks for responding. mavric

 

[c2cthomas]

Adcom has a large number of repair centers listed on their web site - perhaps one is close to you that might have that switch available or can order it. You could jumper around the switch but you will need a schematic to tell if you are going about it correctly plus need the proper tools and knowledge of how to solder, ESD protection, etc.