• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

More impedances for Hammond 125E

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
2,5k, 5k and 10k is not enough for me. By separating the secondary windings of the Hammond 125SEs it is possible to get more primary impedance options. Did some Excel calculating and came up with this:

Skip ORG-GRN will give ca 3,4k:8ohm
Skip GRN-YEL 4k:8ohm
Skip BLK-ORG 6k:8ohm
Skip ORG-GRN and YEL-WHT 8k:8ohm
Skip BLK-ORG and GRN-YEL 13k:8ohm

Datasheet http://www.hammondmfg.com/125SE.htm
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.