These are our R&D mules for the development of a replacement baffle for the Parts Express 1/2 ft^3 curved cabinet.
More pictures & details in this thread
http://www.diyaudio.com/forums/showthread.php?s=&threadid=148240
The FE127eN in these were new stock when installed. They have 300-400 hours esimated on them since installation.
You'll have to finish the baffles yourself. (and we recommend they get glued in place once done)
Comes with the stock grills, and the original baffles if you want them. The long gestation of this project led to the loss of one of the original set of allen bolts (4mm), so using the magnetically attached grills will require a bit of fiddling.
There is a small amount of surface damage to one of the cabinets.
$350 USD + postage.
dave
More pictures & details in this thread
http://www.diyaudio.com/forums/showthread.php?s=&threadid=148240
The FE127eN in these were new stock when installed. They have 300-400 hours esimated on them since installation.
You'll have to finish the baffles yourself. (and we recommend they get glued in place once done)
Comes with the stock grills, and the original baffles if you want them. The long gestation of this project led to the loss of one of the original set of allen bolts (4mm), so using the magnetically attached grills will require a bit of fiddling.
There is a small amount of surface damage to one of the cabinets.
$350 USD + postage.
dave
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.