diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Holton Precision Audio (http://www.diyaudio.com/forums/holton-precision-audio/)
-   -   Amplifier Chassis! (http://www.diyaudio.com/forums/holton-precision-audio/144328-amplifier-chassis.html)

The Saint 18th May 2009 04:01 PM

Amplifier Chassis!
 
Hi :)

I have just released my new amplifier chassis for my
range of HPA-nxVxxx amplifier modules.

The chassis comes per tapped to accept the HPA modules as well
as pre punched holes for the XLR, RCA, Loudspeaker binding posts and IEC mains socket with in built fuse.

http://www.aussieamplifiers.com/Chassis-One-5_2.jpg
http://www.aussieamplifiers.com/Chassis-One-4_5.jpg

For more info and photos checkout the link below.

http://www.aussieamplifiers.com/chassis-1.htm

Sergelisses 19th May 2009 08:55 AM

The price for your products seems me expensive !!!!

Example:
nxV300 audio module , 220 watts RMS into 8 Ohms and 380 watts RMS into 4 Ohms. : $279.00AUD x2 = $558 AUD

PSU-Three power supply board :$269.00AUD

Loudspeaker Protection board :$68.00AUD

Soft Start board:$65.00AUD

Chassis:$265.00AUD

Total=$1225 AUD =948,387 USD


+ Transfo +connectors ....


Serge

Westerp 19th May 2009 09:30 AM

Why expensive? Compared to some phono jacks for 65 AUD it
sounds real cheap to me ;) Oh, did I mention the 'hollow signal
conductor' ? Just like your ears so it must sound good :D

Some 150 euro's for a decent amp is quite a lot of money but
remember r&d plus marketing costs. As long as it's really a good
amp and delivers what it promises. There's a lot of stuff out there
costing even more. The boards look good although I'm not a big
fan of small pcb's and smd.

You can always build yourself a cheaper amp and post your designs here :)

The Saint 19th May 2009 10:14 AM

Hello Serge

Thank you for your comments, but all of my customers over the last 8 months or so would not agree with you. In fact I have had nothing but glowing reports of my amplifiers sound quality, Build quality and service that I provide for them.
My nxV500 amplifier modules have been compared in Denmark against some AR610 Mono Block amplifiers costing $100,000AUD and they reported at the HIFI club they were the best sounding amplifiers they had listened to ever and this is just one out of dozens of reports I have had sent to me, some of which you can read on my web site testimonials page and the web site Gallery.

Just today I had a Australian customer spend just on $2000.00AUD with me and also purchased one of the Chassis-One along with two nxv500 modules and all of the support modules that go with it.

So you see I am selling a premium product, compared to Hugh Deans wonderful amplifiers I am cheap. :)

I would add just one more comment in that you don't have to purchase all of my support products to get a great sounding amplifier I have had quite a number of customers that have retro fitted my modules into their existing amplifier chassis both DIY and commercial amplifiers, all with reported excellent results. :D
or you are free just to not purchase anything at all, the choice is yours...:)

Solve 19th May 2009 10:25 AM

Since you advertise chassies here my only comment is-ugly and expensive.

The Saint 19th May 2009 10:28 AM

Hi Solve

You are welcome, but quite a number of your country men that I had sold my products to would not agree with you :)

jacco vermeulen 19th May 2009 10:45 AM

$200 for a complete power amplifier chassis is expensive ?
I guess i must be living in the fat lands.

Solve 19th May 2009 11:19 AM

Well.. i buy my chassies here.
72 with shipping.
Even if its not same design its good enough for me
and i like the look better.
http://www.modushop.biz/ecommerce/cat067_l2.php?n=1

Sergelisses 19th May 2009 11:27 AM

I talk about the price because the forum is diyAudio and generally
a low price is a good argument for DIY'ers.

Serge

Sergelisses 19th May 2009 11:29 AM

With 900 $

You can find a CREST , a CROWN or a QSC amplifier .

Serge


All times are GMT. The time now is 12:04 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki