I have realized that I would much rather get some of my money (incl. time) back when I have a perfectly good working amplifier powering my loudspeakers now
LM3886 stereo kit: http://chipamp.com/lm3886.shtml
This is a budget setup. Everything was purchased for convenience or price (either at radioshack or mouser among others). Pretty much everything but fuses and a way to secure the earth is included in this kit.
What you see in addition to the assembled LM3886 kit:
(1) 12" x 7" x 3" aluminum basic enclosure, drilled holes for power cable and POT on center of 7x3 inch faces.
(1) 12" x 7" bottom plate with four holes
(4) Rubber feet, mounted to the plate
(1) Avel 250VA transformer. Dual primaries, dual 25v secondaries
(1) Alps stereo potentiometer (log taper I believe) model 100kax2
(2) Knurled knobs, radioshack brand
(1) SPST switch
(4) chassis RCA jacks, two red two white
(50) feet 24AWG wire, half black, half red
(1) 9 foot mains cable, 14 AWG
(1) Fuseholder
(3) Sets PCB mounds (4 mounts, 8 screws each)
(2) pair binding posts
(1) compression lug for earth ground
(2) heatsinks 2.25 square, 8 fins, 7/8 inch tall
Don't remember how much I spend in all, but I do believe it was over $150 US
Would like to get $125US +shipping OBO
May ship overseas since many members do not reside in the U.S. Online references available upon request. Thank you!
LM3886 stereo kit: http://chipamp.com/lm3886.shtml
This is a budget setup. Everything was purchased for convenience or price (either at radioshack or mouser among others). Pretty much everything but fuses and a way to secure the earth is included in this kit.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
What you see in addition to the assembled LM3886 kit:
(1) 12" x 7" x 3" aluminum basic enclosure, drilled holes for power cable and POT on center of 7x3 inch faces.
(1) 12" x 7" bottom plate with four holes
(4) Rubber feet, mounted to the plate
(1) Avel 250VA transformer. Dual primaries, dual 25v secondaries
(1) Alps stereo potentiometer (log taper I believe) model 100kax2
(2) Knurled knobs, radioshack brand
(1) SPST switch
(4) chassis RCA jacks, two red two white
(50) feet 24AWG wire, half black, half red
(1) 9 foot mains cable, 14 AWG
(1) Fuseholder
(3) Sets PCB mounds (4 mounts, 8 screws each)
(2) pair binding posts
(1) compression lug for earth ground
(2) heatsinks 2.25 square, 8 fins, 7/8 inch tall
Don't remember how much I spend in all, but I do believe it was over $150 US
Would like to get $125US +shipping OBO
May ship overseas since many members do not reside in the U.S. Online references available upon request. Thank you!
Yes exactly. The Boards are completely assembled and I am including EVERYTHING listed above. ThanksFrancois G said:I'm not sure what you are offering for $125 - a dual mono PC board with all parts installed plus the list of misc items?
Thanks.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.