I assume its a back electret mic of cylindrical construction?
Be careful not to overheat it! Anything smaller than a 6mm diameter really needs a heatsink when soldering or else the diaphragm will just vaporize.
Of course, opening up the cellphone in the first place is pretty tricky.
good luck!
Be careful not to overheat it! Anything smaller than a 6mm diameter really needs a heatsink when soldering or else the diaphragm will just vaporize.
Of course, opening up the cellphone in the first place is pretty tricky.
good luck!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.