Rewiring a socket to take 6GK6 instead of 6BQ5

[diamondsouled]

Just wondering if anyone has tried 6GK6s in place of 6BQ5s and how the tube socket needs to be rewired.

Also how do the two tubes compare sonically?

Thanks

Larry

 

[Klimon]

For rewiring check the pinouts on the datasheets (duncanamps.com)

Simon

 

[gingertube]

6GK6 has the G3 run out to pins 1 and 9 whereas the 6BQ5 has it internally connected to the cathode (pin 3).

The anodes, Grid 1 and heaters are all the same (pins 2,4,5,7)

The screen grid of 6BQ5 is pin 9, change this to pin 8 for the 6GK6

The cathode of 6GK6 is pin 1 whereas it is pin 3 for 6BQ5
BUT pins 3 and 9 of the 6GK6 are Grid 3 which in the 6BQ5 is an internal connection back to pin 3. Just link pins 1 and 9 to pin 3 for the 6GK6.

Summary:
change g2 connection from 9 to 8
link pins 1 and 9 to pin 3

Cheers,
Ian

 

[diamondsouled]

Thank Ian!

Exactly what I needed.

Larry