Looking for SS D or MC hardware parts

[Jonny Hotnuts]

I am not posting this in the wanted section....I thought here would be better considering the subject.



I just purchased a MC300 that was….not cared for as well as I care for my amps. It works perfectly but was missing a few things and I would like to get them back to original if possible.


Things I need.

8 of the plastic push in caps that go in the bottom of D-MC amps.
1 RCA nut with the plastic washer
4 the SS cover Allen screws.
1 (most important) the guy who had it used a pan head screw to replace the slotted set screw that clamps the ground wire. It sticks up ¾ inch higher than it should and looks like poop.


If you have some or all of these items I would be willing to pay a fair price.

THanks

-JH

 

[ca90ss]

You can get the plastic push in caps here
http://www.boltproducts.com/1000-black-p-26687.html

Try contacting this guy for the rest of the parts you need
http://hometown.aol.com/jandrelectronics/

I have 3 MC300's, they're excellent amps.