I have a couple of small class d amplifier boards I purchased as samples a couple of months ago. On the back of the pcb there is a small SMD chip that says "Bittonic BD3688S". This particular module is a 2.1 amp and I am pretty sure it is basically 2 stereo amplifiers with one of them bridged. I can't find any information whatsoever about bittonic. Has anyone heard of them before?
I still havent found my camera but I have a link that might provide some additional information.
http://www.pactw.com.tw/product_3.asp?p22id=0&p21id=0&p2id=0&p1id=56&p1=?? IC&p2=&p21=
I have a couple of DTC-0900 that I am experimenting with.
http://www.pactw.com.tw/product_3.asp?p22id=0&p21id=0&p2id=0&p1id=56&p1=?? IC&p2=&p21=
I have a couple of DTC-0900 that I am experimenting with.
Searcheth and thou shalt findith!!!!
ftp://ftp.pactw.com.tw/product/Audio IC/Class D Module DM 2006.pdf
Still can't see the IC side of the board though.
ftp://ftp.pactw.com.tw/product/Audio IC/Class D Module DM 2006.pdf
Still can't see the IC side of the board though.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Class D
- Bittonic?