• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

For Sale: NHT Loudspeaker drivers and amplifiers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
diyAudio Editor
Joined 2001
Paid Member
We have a large quantity of drivers from discontinued products that we
would normally just throw out. It kills me to see this stuff go to
waste, so I've managed to convince the powers that be to let me sell it
off instead. There is quite a selection available from 1" tweeters to
10" subwoofers. There are also a couple of amplifier modules and
terminal plates available. All of the drivers are brand new. Some of the
amplifiers are brand new, some are used. All of the terminal plates are
brand new. We have Klippel data, T/S parameters, dimensions, photos,
quantities and prices for all drivers on my website. Schematics are
available for the amplifiers. These are supplied with the purchase. The
address with all of the data is: http://home.comcast.net/~jhidley/

Variac has mentioned that he will start some sort of thread for
questions relating to these drivers and amplifiers. I'm not sure how
much time I can spend answering them. It will most likely happen in
spurts.

Jack Hidley
VP of Engineering NHT
www.nhthifi.com
 
diyAudio Editor
Joined 2001
Paid Member
Post #2
This is a paid advertising thread which can be posted to and edited only by the person renting it and the moderators.

There is a companion thread for product support, discussion, or feedback, which can be posted to by all members here:

http://www.diyaudio.com/forums/showthread.php?s=&threadid=103684

Mr. Hidley has mentioned that he may not be able to check this thread in a timely manner , so please be patient if you post there.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.